Re: Samsung PN51D550C1F died, won't turn on, clicking
It could be Tom. I just don't know how I would tell if it was bad. It worked for a few seconds. I noticed on the backside that there were two wires that someone had soldered on to something I guess to fix something. It was weird there was silicone on the wires globbed on for some reason. I think this is the reason I got my money back.
These boards are so scarce I have no idea where to find one. This board had the exact same configuration as mine, except it was stamped DF instead of DFG and was a lower revision number. It apparently came from the same model of TV as well; I have seen pictures of my model with the back removed showing this board inside.
It might have been defective, but something made it go boom. And I have no idea where to look.
Originally posted by tom66
View Post
These boards are so scarce I have no idea where to find one. This board had the exact same configuration as mine, except it was stamped DF instead of DFG and was a lower revision number. It apparently came from the same model of TV as well; I have seen pictures of my model with the back removed showing this board inside.
It might have been defective, but something made it go boom. And I have no idea where to look.
Comment