Samsung QLED QE65QN800A 8k keeps cycling on/off

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jagiro84
    Member
    • Jan 2020
    • 41
    • Netherlands

    #1

    Samsung QLED QE65QN800A 8k keeps cycling on/off

    I am having issues with my TV which is repeatedly turning itself on and off , some time's it would show a boot logo and the homescreen and then repeat the power cycle, and sometimes if I am quick I can reach the settings menu and it would stay working and other times shutdown again.

    Here is a video of the symptoms the TV has:
    https://vimeo.com/1117381014?fl=pl&fe=sh

    I have already opened up the one box that's connected to the TV , and the TV back itself , after inspecting each of the components I can see no burn marks or swollen capacitors.

    Also I noticed if I leave the one box disconnected for let's say 10min and start the TV again it would easier boot to the main screen and work for 10-15 seconds before shutting down, as most of the times it shuts down right after the boot logo.




    Attached Files
  • jagiro84
    Member
    • Jan 2020
    • 41
    • Netherlands

    #2
    Another thing I noticed is when I plug in mine fire stick tv it is showing some kind of artifacts in the image, I was quick enough to capture it with my phone before it turned off

    Could this be due to failure of the GPU/CPU inside the panel? Or the image processing chip that's inside the one box?
    Attached Files

    Comment

    • jagiro84
      Member
      • Jan 2020
      • 41
      • Netherlands

      #3
      I did some more testing , and I noticed whenever I disable 1 part of the screen(doesn't matter which one) the TV would stay on and there are no artifacts or reboots .

      Maybe the TV is struggling to keep the voltage stable with everything connected?
      Attached Files

      Comment

      • yamahamm6
        New Member
        • Feb 2018
        • 1
        • poland

        #4
        hi,screen is defective,problem with CKV lines on left or right side panel.

        Comment

        • jagiro84
          Member
          • Jan 2020
          • 41
          • Netherlands

          #5
          Originally posted by yamahamm6
          hi,screen is defective,problem with CKV lines on left or right side panel.
          I have resolved the issue by using tape on the right side few pins of the panel and screen is working perfect again.

          Comment

          Related Topics

          Collapse

          • Document Archive
            Samsung 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U Chromebook Specification for Upgrade or Repair
            by Document Archive
            This specification for the Samsung 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U boardview and 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help...
            09-07-2024, 12:10 AM
          • Takeatry
            Yet another Samsung QLED Boot Loop
            by Takeatry
            Samsung QLED QN50Q — purchased 2022 started experiencing a delay in the picture coming on in the morning less than 2 years later. Did not know the term boot loop at that time. As the loop delay ran into a few minutes did all the recommended troubleshooting, soft and hard reset, changing cables and outlet locations, no help. As the delay increased contacted Samsung tech group and allow them remote access the tv. Tech was moving too fast to see exactly what he was doing but this ultimately it was also no help. Lived with the delay until it stretched out over 6 hours. Pulled of off the back cover...
            10-04-2024, 02:57 PM
          • torchzack
            Samsung 55" TV - Boot loop but sometimes works fine - UE55MU6470U
            by torchzack
            Hi Team - just joined to see if anyone can offer some expertise in diagnosing an issue with a TV.

            I've done a few hours googling and youtubing but just seeing if anyone has any insight here. I got a 55" Samsung UE55MU6470U which seems to boot loop and then after 10 mins will boot, work for a few minutes, then turn off and repeat.

            Whilst it's on into the normal Samsung menu/boot screen it looks perfect - so I can't see there being any screen issues. I've seen lots of videos with taping across clock lines to diagnose which particular one may be an issue but i don't...
            08-28-2023, 07:42 AM
          • Document Archive
            Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
            by Document Archive
            This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
            09-07-2024, 05:50 AM
          • eigma
            Samsung UN40H5003 boot loop every ~8 seconds
            by eigma
            Hi, I rescued a Samsung UN40H5003AF (H = 2014 FHD) from the curb. Symptoms are: standby (red) light comes on, stays on for 8 seconds, flickers off, then comes back on, and the cycle continues.

            Service manual: https://www.electronica-pt.com/esque...is-u8la-71272/

            SMPS board: checked voltages, all seem normal (A13V = 12.8V, UD = 3.3V, PWM_BLU = 0.77V, PS_OnOff = 5.5V). Remove 10p cable to main board -> backlight comes on. I think this means SMPS board and backlight are good.

            Main board: BN94-07592P / BN97-08922R...
            11-20-2024, 10:31 PM
          • Loading...
          • No more items.
          Working...