Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • howardc64
    Badcaps Veteran
    • Jun 2017
    • 590
    • United States
    #1

    Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure

    Eventually discovered a burn mark near lower corner of LCD. Here is a summary
    • Backlight on, no image
    • Disconnect right buffer board (view from front), left side display comes on
    • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
    • Buffer board is pretty simple
    Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright spot above burn mark on LCD is just flashlight reflection getting the area lit for pictures.

    Since the panel is defective, only salvage parts.

    Click image for larger version Name: IMG_4680.jpg Views: 0 Size: 2.80 MB ID: 3680343 Click image for larger version Name: IMG_4678.jpg Views: 0 Size: 4.21 MB ID: 3680344 Click image for larger version Name: IMG_4677.jpg Views: 0 Size: 2.60 MB ID: 3680342 Click image for larger version Name: IMG_4679.jpg Views: 0 Size: 4.44 MB ID: 3680345 Click image for larger version Name: IMG_4681.jpg Views: 0 Size: 3.77 MB ID: 3680352 Click image for larger version Name: IMG_4682.jpg Views: 0 Size: 4.38 MB ID: 3680353 Click image for larger version Name: IMG_4686.jpg Views: 0 Size: 3.79 MB ID: 3680354 Click image for larger version Name: IMG_4687.jpg Views: 0 Size: 4.06 MB ID: 3680349 Click image for larger version Name: IMG_4688.jpg Views: 0 Size: 3.56 MB ID: 3680355 Click image for larger version Name: IMG_4689.jpg Views: 0 Size: 4.06 MB ID: 3680348 Click image for larger version Name: IMG_4693.jpg Views: 0 Size: 2.28 MB ID: 3680351 Click image for larger version Name: IMG_4694.jpg Views: 0 Size: 2.16 MB ID: 3680350
    Attached Files
    Last edited by howardc64; 07-11-2025, 04:10 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • howardc64
      Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
      by howardc64
      Failure Symptom



      No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

      Where is the short?

      Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



      Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
      05-27-2025, 02:56 PM
    • dumbdd
      Sony VA panel burn in
      by dumbdd
      I have a Sony 75x940e that I just fixed with the help of the forum (bad emmc). For the last couple of months I was noticing some burn in of the android home icons on dark backgrounds (photo is attached). I always thought VA panels were immune to burn ins. Is there anything I can do to fix it? Could it be because of a failing component other than the panel itself?...
      07-19-2023, 09:23 PM
    • howardc64
      LG 49UJ6500 LCD panel lighter band that goes away
      by howardc64
      49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

      Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
      02-19-2023, 12:13 AM
    • triplefour
      SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
      by triplefour
      TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

      tcon is built into mainboard.
      Only one cable goes to panel boards.
      there is a cable from one panel board to the other that links them.
      cost cutting measure that results in us having harder time to diagnose.
      removing the link to the second panel board allows TV to stay on with stable backlight but no image.
      used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
      07-28-2022, 07:59 PM
    • Storyteller12
      QN55Q60R Service Menu Panel Help
      by Storyteller12
      I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

      I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

      I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

      the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
      01-13-2024, 01:57 PM
    • Loading...
    • No more items.
    Working...