Sharp LC-le70650u SM_Pow 13V issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sith
    New Member
    • Aug 2014
    • 6
    • canada
    #1

    Sharp LC-le70650u SM_Pow 13V issue

    Hello all I have a 15 month old 70' that died today, after a power flicker it flashes twice and twice(slow/fast) on the front led, i look forward to some assistance to fix this, there was a very similar problem here: https://www.badcaps.net/forum/showthread.php?p=430446

    same voltage situation, 5 and 3v present but no 12/13, in both error flashing mode and led on(chan up/vol down) mode, and caps/fuses/resistors look ok. Here are some pics please advise as to possible diagnostics/fixes, Ie: can I bridge pins on PD connector to force power supply on?

    some pics are attached to help. i will do some diode, rectifier and fet checking tomorrow, thanks in advance!
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • claytongarcia
      Issue with Sharp LC-42SB45U
      by claytongarcia
      Hello everyone,

      I recently got a model Sharp TV, and I've noticed that the green power LED is flashing without any specific pattern. Additionally, there appears to be no voltage coming from the power board. I haven't observed any leaking or bulging capacitors, although the top of the larger capacitor doesn't seem to be perfectly flush with the jacket—if that makes sense.

      Has anyone dealt with this issue before?​
      03-10-2025, 07:27 PM
    • leorivers
      Issue with Sharp LC-47SB57UT
      by leorivers
      Hello,
      I bought Sharp LC-47SB57UT 6 years ago. I had to have a vhf antenna to pick up one local station(koco channel 5 OKC). It has worked great up until a week ago. Sometimes I couldn't get channel 5, now I can't receive it at all. I can hook up a digital convertor box I have from another tv and can receive channel 5.
      I think the antenna and cable is ok. I doubt that this would be the tuner board or possibly something else.

      Any ideas where I should start?​
      10-24-2024, 03:11 AM
    • rounin
      MacBook Air A2337 (820-02016) USB-C Port Issue – Only Works in One Orientation (CC Line Problem?)
      by rounin
      Hi everyone,

      I'm working on a MacBook Air 2020 (A2337, board 820-02016) and running into a strange USB-C issue. I've gone through quite a bit of testing and part replacement, but I'm stuck — hoping someone here can shed some light.

      🛠 Original Issue
      The machine initially wouldn't negotiate 20V over USB-C — stuck at 5V.
      Diagnosis showed PP1V5_UPC0_LDO_CORE shorted to ground.

      I replaced U3100 (UF400) using a donor board (A2179), and the machine powers on fine now.

      ⚠️ New Problem: One USB-C Port Only Works in One Orientation...
      04-19-2025, 01:18 AM
    • ugamazing
      Three 820-01700 32GB Logic Boards Same Issue: Won't Wake From Hibernate
      by ugamazing
      I have three identical-spec 820-01700 boards (2.6/32/512), and ALL THREE boards came to us with the same fault, from different sources: The boards don't wake from hibernation with the keyboard or lid, they ONLY wake when you press the power button. I understand this is a very minor issue, but the boards must be fixed!

      We will of course begin with the obvious (checking lid signals), but I couldn't help but notice these three boards were all 32GB variants. Has anyone noticed an issue relating to these 32GB boards in particular? I of course don't think it's a RAM issue, but it's bizarre...
      12-17-2024, 07:05 PM
    • shahnld
      Lenovo legion 5 pro startup issue
      by shahnld
      Good day Experts
      I have a lenovo Legion pro 5 16ACH6H with AMD RYZEN 7 5800H and RTX3070,.

      A weird issue has troubled me. If i power on off the laptop 20 times then only power LED will lit but no fan spin no display. At this stage gpu, vram. DDR voltage. 5v 3.3v 1.8v and the rest are present and cpu core is stuck at 0.84v.

      And sometimes lets say the 21st time it will boot perfectly and there is image and everything is working perfectly and at this stage i see cpu core...
      08-24-2025, 12:31 PM
    • Loading...
    • No more items.
    Working...