Hi I have in my workshop this set - no led , no errors blink , after 1 min relay clik one time .Main board is QPWBXG446WJN1 , nand - TC58NVG3S0FTA00 , I think dump is corrupted .I have usb update , but upg only .I am looking dump for this chassis .
-
I need dump file for nand A2159 512GB with 2 Nand chips >.I upgraded 128gb to 512gb..I use P13 there are only 4Chips...
I need dump file MACBOOK PRO A2159
TSB4232(256)
TSB4229(256)
Thanks -
Hi everyone,
I’m trying to bring a LG SK10Y soundbar back to life. Currently it is stuck in the “PLEASE WAIT” loop.
My conclusion so far is that something fails to boot fully, but it does start via eARC and can play perfectly good sound until watchdog shuts it down.
After dumping NAND with a T48 programmer, extracting with binwalk and exploring with Ghidra I think:- Kernel B is present, but no Kernel A. Is that normal?
- SquashFS A/B are present
- Bootloader is present
- UBI region is completely empty (only volume 0 / layout volume exists)
- No system.cfg,
11-13-2025, 03:19 PM -
Hi.
I'm looking for a DSP NAND DUMP for the Onkyo TX-NR5007 that works with the DZKB4 chip. Can anyone help?
Regards.09-20-2025, 12:09 PM -
Hello,
i want to repair an Onkyo TX-NR809 receiver.
symptoms:
on power on, display appears and i hear one click. enue functions is given.
- no hdmi output
- audio output not tested, but i think it is not there
- usb sticks are not recognized
if i read out the chips with display+standby button + tone+
both dts show only ????
chip is D830K013BZKB4
things i have done:
- reflow of the dts chip without taking off and reballing
- changed the aluminium caps without the big one with 25v because i dont...08-25-2025, 01:04 AM -
I have a board with bad NAND chips. I have donor chips ready but I don't have any way to program these. I have a JC P15 programmer but it doesn't have the m1 series boards on it to program. So if anyone could provide me with dumps for the same board number would be awesome!...
Comment