Need info samsung un75nu6900f mainboard

[HelpMeRepair]

Hi , I was asking myself if someone know the value of the transistors and capacitor that most people sell in there repair kit for this tv psu board

thanks in advance

[KYBOSH]

Hi , I was asking myself if someone know the value of the transistors and capacitor that most people sell in there repair kit for this tv psu board

thanks in advance

The value isnt in the parts themselves but rather the knowledge of what's needed to make the repair as well as the time saved sourcing said parts individually.
Also these curated kits will include descent quality parts that are spec'd correctly.
It may also include instructions on how to get the job done for laymen.

Hope this helps and good luck.

[HelpMeRepair]

thanks for your wisdom !


I'm looking to replace those 3 parts I'll do my research on mouser and Digi keys

[EazyBone]

Third picture doesn't show up so don't know what it is. But here's for blue caps. Your MOSFETs are likely blown also and a fuse.

https://www.amazon.com/Hilitchi-150-...s%2C109&sr=8-1

[HelpMeRepair]

I have looked around , and tell me if I am wrong guys , but this mosfet can replace the one ont the board

PJMH190N60E1_T0_00601 Panjit International Inc. | Discrete Semiconductor Products | DigiKey

[HelpMeRepair]

Third picture doesn't show up so don't know what it is. But here's for blue caps. Your MOSFETs are likely blown also and a fuse.

https://www.amazon.com/Hilitchi-150-...s%2C109&sr=8-1

thanks , I'll keep that in mind for future repair

[HelpMeRepair]

Hi , I was asking myself if someone know the value of the transistors and capacitor that most people sell in there repair kit for this tv psu board

thanks in advance

i meant MOSFET not transistors , oops

[HelpMeRepair]

part received and swapped , board work A1 , thanks for your help guys ! 😀

---> the package of the mosfet I chose was different then original , but I made it fit and have a nice contact surface so the temperature transfer to heatsink already in place is good. ( proper siting and thermal glue )