Model # is LN32C450E1DXZA. Please see attached...(sorry it is not the best quality). Cuts on fine but top 3/4 of the screen appears to be scrolling and flickering. Any ideas where to start here?
Please see attached picture of TV with cover off. Only board here resembling a TCON is actually a thin one at the base of the unit. This board has factory tabs to the panel itself and i cannot change.
Tested all voltages fine. 12v, 24V and 5V supplies good. On the pic, the TCON board cant be seen but it is underneath the panel base. This part is not replaceable no? It has factory tabs connected to the LCD itself.
Likely cause is bad panel, small chance of LVDS interface problem or main board fault.
No T-con in this set, it's built into the panel.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
this link is not exactly your board, but it should fit
If you look at the picture you will see the type chip that is under your largest heatsink.
this is a good place to suspect issues
Comment