LG37LP1D flashing light and clicking sound

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nuryev
    New Member
    • Mar 2010
    • 8

    #1

    LG37LP1D flashing light and clicking sound

    Hi all,
    A friend's LG TV has a similar problem to that posted here and I am wondering if the optocoupler fix would apply to this tv as well.

    There a few bulging caps on the power supply and these were replaced but the problem persists.

    Any advice is appreciated.

Related Topics

Collapse

  • Sisko
    Onkyo-593 No power and now clicking sound
    by Sisko
    Hi all!!

    Ok just got a Onkyo SKW-593 sub woofer that has no power person told me that it smoked and that his GF let the volume full when she powered off the amp and when he came to turn it on the sub played but then suddenly smoke was coming out, didn't say from where. So opened it up and saw a resistor made of metal (pic) but can't see any writing on metal par so what ever was written on it was burnt. So I'm kinda stuck here with this. I did ask for a repair or schematics in the other group section and waiting for this but I hope someone here might lend me a hand to try and identify...
    10-03-2025, 02:18 PM
  • B0r1s
    Samsung UE49KS7000SXXH - fast clicking sound in standby mode
    by B0r1s
    PSU - BN44-00878A

    Symptoms:

    The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
    A weak clicking sound was coming from the transformer.

    Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

    Progress:

    After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
    01-17-2023, 04:58 PM
  • MOSSEP
    Monitor Audio RSW12 - Green light, but no sound
    by MOSSEP
    Hi

    Im hoping someone might be able to give me some idea of what may be wrong with my Monitor Audio RSW12 Sub.

    Ive owned it since new in around 2002, so would really like to keep it running if I can, it was the first ‘decent' bit of audio equipment I ever purchased and is a little sentimental.

    The issue I had was that it would power up with the red light, but sometimes the green light would not come on and I would get no bass from it. If the green light did come on though, I would get sound out of it.

    I have already tried replacing all of the...
    01-26-2025, 08:33 AM
  • esqmooo
    HP Elitebook 845 G8 dead, only caps lock flashing 7 times. Charging light always on
    by esqmooo
    Hello everyone.

    This is my development machine. I've been using it since two years and half without any problem except sometimes it wouldn't wake up from sleep.
    Lately the issue became more frequent and powering it up would take few seconds to show the POST screen.
    Then the computer refuses to power on at all. Now only the caps lock button flashes 7 times then stops. The charging light is always on whenever a power source is connected (battery or charger).
    I tried long pressing on the power button, after several seconds it would go off then when the button is released...
    03-11-2025, 03:57 PM
  • slimmy182
    [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
    by slimmy182
    Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

    I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

    Looking on google I found this:...
    01-14-2023, 11:55 AM
  • Loading...
  • No more items.
Working...