Announcement

Collapse
No announcement yet.

panasonic tx37px70ba

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    panasonic tx37px70ba

    i have a panasonic the green light flashes over and over then goes constant after a minute the x sus and y sus light come on why its flashing then when it goes constant it goes off
    Attached Files

    #2
    Re: panasonic tx37px70ba

    13 blinks i have

    Comment


      #3
      Re: panasonic tx37px70ba

      Check the service manual for the 13 blink cause.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #4
        Re: panasonic tx37px70ba

        i have and i have found a post about 13 blinks so got the heat gun out wish me luck

        Comment


          #5
          Re: panasonic tx37px70ba

          no joy

          Comment


            #6
            Re: panasonic tx37px70ba

            To repair a TV, or anything, try to break down the problem.
            - What does 13 blinks code for? Check the manual.
            - Check the causes of this 13 blinks if available - for example if it says A Board+3.3V down check the 3.3V, if it is not present then trace back.
            - Don't just randomly try stuff or shotgun replace parts - you'll spend money, waste time, and learn nothing.

            Even if you did "fix" the TV with the heatgun, I would hope you would not return it to a customer, or sell it like that. It is very likely just to die in a couple of weeks. With a BGA, a proper reflow technique, and ideally a full reball, is really necessary.
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            Working...
            X