I'm working on 42 inch set that I can't turn on. I have diagram and followed the flow chart which was pretty easy. The chart said replace the AV panel and I did but have same trouble. Red light blinks 3 times off and on. I have my 3 volts and 5 volts when I plug it up and I traced the 3 volt turn on back to IC on AV panel and it works up to that point but that s as far as can get change in volt. when switch is applied. Checked all panels for bad conn. and caps. and etc. seems to be ok. I have volt meter and can follow instruction ok. I'm just not familiar about this turn on path. I appreciate any help. Thanks!
-
-
Re: T0shiba Model 42HL196 won't turn on
It's probably the three ic fix. Very common on these models. Look it up on shopjimmy.com -
Re: T0shiba Model 42HL196 won't turn on
Thanks I'll do that.Comment
-
Re: T0shiba Model 42HL196 won't turn on
That fixed it. The three ic's did the job--thanks!Comment
-
Re: T0shiba Model 42HL196 won't turn on
No prob. I can't believe I just got rid of mine after the headache it put me through and all the money I had invested in it.Comment
-
Re: T0shiba Model 42HL196 won't turn on
Replace q820a srx2039, q860 strz4479, q880 strw6765.Comment
-
This specification for the HP ZBook 14 G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14 G2 Base Model boardview and 14 G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...09-06-2024, 05:27 AM
-
This specification for the HP EliteBook 840 G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 840 G2 Base Model boardview and 840 G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-06-2024, 05:27 AM
-
This specification for the HP ProBook 640 G1 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 640 G1 Base Model boardview and 640 G1 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-06-2024, 05:27 AM
-
This specification for the HP ZBook 15u G2 Base Model Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 15u G2 Base Model boardview and 15u G2 Base Model schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...09-06-2024, 05:27 AM
-
Hello, i have some issues with my laptop Lenovo Y700-17ISK (motherboard BY511 NM-A541), it started when i turn on the laptop, but the lcd wont turn on, i then connected it via hdmi to tv and screen was ok. So i thought maybe lcd stripe is faulty, i removed the bottom cover, disconnected main battery, reset the cmos by disconnecting battery for 1 min, then slighty move the lcd stripe. Conncted power supply and tuned on my laptop, the lcd turn on, it started to load os, then it turn off, after a second it turn on, then after like 3 seconds turn off again, and so on. Removed power supply, waited...
Comment