KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • #KL@73T
    New Member
    • Mar 2014
    • 4
    • USA

    #1

    KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

    Hello every body

    Have a power supply board KAS200-5S242212X VER:A2.31 that belongs to a Polaroid FLM_3201__32_lcd_tv
    and need the schematic diagram for this board.

    I download the service manual, in drawing 14/18 power supply is not the one coming from the board itself.

    the OUTPUT is +24V/6A +22V/1.6A +12V/3A +5V/0.3A

    I was following the post "polaroid flm3201" from 04-01-2012, 07:13 PM,

    Will appreciate any link to find the schematic diagram for power supply board KAS200-5S242212X VER:A2.31

    Until now in my searches, found replacement PS for sale, and kits for sale, but not what I'm looking for, thanks.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

    Not sure if exact match:
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • #KL@73T
      New Member
      • Mar 2014
      • 4
      • USA

      #3
      Re: KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

      Tom66 you are really fast
      will check your link
      and let you know
      thanks again

      Comment

      • #KL@73T
        New Member
        • Mar 2014
        • 4
        • USA

        #4
        Re: KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

        Tomm66
        yes that's the one
        Will digest it, very slowly at my pace and follow it.
        Have @ 167v on the C903 and not the 375 to 425V required.
        thanks again

        Comment

        • thengoc83
          New Member
          • May 2015
          • 1
          • vietnam

          #5
          Re: KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

          dkl32ex700 электрические схемы помощь? Спасибо, парни

          Comment

          • Alastair E
            Chief Womble
            • Mar 2013
            • 1963
            • U.K.

            #6
            Re: KAS200-5S242212X VER:A2.31 Power Supply Schematic Diagram

            Originally posted by thengoc83
            dkl32ex700 электрические схемы помощь? Спасибо, парни
            Err--You would be MUCH better off if your question was in English rather than Russian!
            Most here speak English and Ive no idea how many Russian speakers we have here....
            TELEFIX

            How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
            http://www.irf.com/technical-info/appnotes/an-1088.pdf
            PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

            Comment

            Related Topics

            Collapse

            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              11-22-2024, 01:46 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • sam_sam_sam
              Modification to a ZD-987 desoldering/soldering station using a external switching power supply
              by sam_sam_sam
              I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

              I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
              07-01-2024, 06:34 AM
            • JimBanville
              Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
              by JimBanville
              The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
              Opened it up and discovered the power supply is making a faint clicking or ticking sound.
              I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
              I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
              09-13-2023, 07:21 AM
            • birchy7
              Arcam FMJ A29 Stero Amp - schematic diagram of power supply
              by birchy7
              Hi, I'm hoping someone on here can supply or point me in the right direction for a service sheet for the above amp.
              Its on the bench, no power, all 3 fuses on main board are intact. no voltages are coming out of the mains tranformer, but it is recieving its input voltages ok, theres a relay in circuit with the transformer that might be my problem, either that or the transformer itself, would love to have the circuit diagram just to see how exactly this operates, many thanks in advance...cheers

              EDIT, sorry made a typo, its the ARCAM FMJ-A29 i need, not A32, sorry all
              09-25-2024, 10:59 AM
            • Loading...
            • No more items.
            Working...