Panasonic Vierra TH-50PZ70B Plasma, no picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • safesurfer65
    Senior Member
    • Feb 2014
    • 112
    • Scotland
    #1

    Panasonic Vierra TH-50PZ70B Plasma, no picture

    Hi all

    Hope someone can help. I've got a vintage 50" plasma TV (Panasonic Vierra TH-50PZ70B). It switches on, menu works, sounds works but no picture in any of the inputs. But when you switch it to analog it shows the snowy noise picture (dont know the technical name for this). I opened it up and checked all the fuses, capacitors, signs of fried components but found nothing. I've done the reset through the menu but no joy. Any ideas on this one ?

    Many thanks

    Mark
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • jm1234
      Panasonic plasma TX-P42ST50 - 6 blinks
      by jm1234
      Hi,
      anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
      It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
      I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
      I checked that board for any obvious faults...
      05-22-2024, 06:59 AM
    • KYBOSH
      Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
      by KYBOSH
      Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
      No picture but you hear the TV static (white noise) playing loud and clear.
      The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
      But it seems they didn't get too far and just left it.

      When I first took a look I was amazed at how pristine the inside looked.
      Its as if the TV had been in a time capsule.
      Caps looked like they were just pulled off the self.
      Copper coils had no sign of corrosion on...
      02-01-2023, 11:10 PM
    • stecos
      Panasonic Plasma main board repair (ST30 GT30 VT30 ST50 GT50 VT50),LED with 3 blincks
      by stecos
      Hi everyone!
      I happened several times, in the search for help from the web, to consult this very interesting forum.
      So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.

      Having said that I come to the gist of my post on the forum as the title suggests.
      For my passion for technology I'm now collecting several...
      11-28-2022, 11:39 AM
    • FZG
      Panasonic AG-1000B VHS player with bad picture quality
      by FZG
      Hello!

      I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

      Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

      I want to know, is this something that could be solved by recapping or is the video head likely gone?

      Also, what mechanism is this?

      Any feedback is appreciated!...
      05-06-2024, 07:16 AM
    • Bazfletch3
      Panasonic TH-65FX800A backlight LED's working but picture is very dark
      by Bazfletch3
      Hi all

      While I have quite a decent background in electrical & electronic troubleshooting & repairs, this is my first time stripping down an LCD TV for repair.... I have inherited a 3yr old Panasonic LCD which has a picture, but it is quite dark (too dark to be watchable - but still quite easy to see; I didnt need a torch to see it).

      I started by checking and trying to adjust all of the picture and backlighting levels, but that made little to no difference. I also did a factory reset.

      From there I envisaged that the backlighting wasn't working, however...
      01-08-2024, 10:18 PM
    • Loading...
    • No more items.
    Working...