Pn64f8500

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tvtimmy
    Badcaps Legend
    • Mar 2015
    • 1160
    • usa
    #1

    Pn64f8500

    I'm working on the y-main board and I need help figuring out what Q5019 and Q5021 are. They are made by AUK and the first 3 identifying marks are SMK. The rest are blown off and lost. The board is LJ92-01935A.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • tvtimmy
      Badcaps Legend
      • Mar 2015
      • 1160
      • usa
      #2
      Please check your parts bins for boards you may have forgotten about for the last 10+years. Somebody out there has one.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • marillo
          Circular marks left on TV screen after using suction cups
          by marillo
          Hi everyone,

          I’ve got a bit of an issue with my TV. I used suction cups to handle the panel while waiting for new backlights to arrive, and they ended up staying on the screen for a few days. Now that I’ve removed them, I can see two large circular marks where the cups were.

          The screen wasn’t powered on during that time, but the circles are still clearly visible when the TV is off (and I think slightly visible even when it’s on).

          Any tips for fixing it would be greatly appreciated. Cleaning doesnt help. I guess it s pressure damage and not reversible...
          11-02-2025, 02:38 PM
        • Bivolalbert
          Help figuring out the resistance of this exploded resistor. gtx 1060 6gb inno3d compact
          by Bivolalbert


          Hello,I need help figuring out the resistance of this exploded resistor. I'm pretty sure it's the one labeled R37. I tried measuring it with a multimeter, but I got different values each time, probably because it's exploded. If you have a schematic, it would be really helpful!
          Its a gtx 1060 6gb inno3d compact, i you have schematic it would be very helpful....
          02-13-2025, 10:30 AM
        • lowpost99@gmail.com
          Help with Dell Latitude E5470 that shuts down when moved at all. Powers up, but no charge, power jack has brown burn marks
          by lowpost99@gmail.com
          I have a Dell E5470 that powers up and boots windows no problem. Using a non-standard universal type charger, it shuts down immediately if moved, (power short in that charger or AC power jack) because the battery has no charge and isn't charging orange/white lights blinking on the front. When first powered up, BIOS power alarm stated that it could not detect the voltage setting and I had to dis-able the message to get past this. It got into Windows fine, as long as not moved, so I dis-assembled it looking for a cold solder joint on the power jack that I thought might be lifting off the MB, but...
          09-03-2024, 02:57 PM
        • ttmi100x
          HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
          by ttmi100x
          Greetings everyone,


          I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


          The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
          Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

          Upon closer inspection...
          "Burnt" resistor
          6 Photos
          07-31-2024, 06:36 PM
        • freakorio
          Need Help To Identify Component on Ymain LJ41-05120A
          by freakorio
          Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
          1 Photo
          05-21-2024, 02:32 AM
        • Loading...
        • No more items.
        Working...