pilot 46'' lcd

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • willyam1
    Senior Member
    • Feb 2012
    • 112
    • israel
    #1

    pilot 46'' lcd

    dear friends.
    problem is that it dosent remeber the data that the user put in pic mode.
    also when using contrast it make opesite action means when contrast is up the pic become darker in level between o-to 18 can see pic more then this 19 -100 pic dark.
    i made reset no joy also enter to service mode and made CLEER EEPROM no joy.
    is the problem is in the eeprom or in the flash memory.
    MAIN BOARD IS BY CHANGHUNG JUG7.820.672 CHASSIS LS06.
    ENTER SERVICE MODE/ INPUT THEN 3138.
    ANY AIDA?.
    WILLYAM
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • SidneyCanadas
      93C46 and 93C56 EEPROM
      by SidneyCanadas
      I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:

      https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2

      Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old...
      06-14-2023, 01:16 PM
    • Document Archive
      Acer TravelMate P259-G2-M-3138 Notebook P2 Specification for Upgrade or Repair
      by Document Archive
      This specification for the Acer TravelMate P259-G2-M-3138 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the P259-G2-M-3138 boardview and P259-G2-M-3138 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or...
      09-06-2024, 10:51 AM
    • dmccul2698
      Pioneer DEX-P99rs "No EEProm " diagnostic code.
      by dmccul2698
      Hello, My head unit developed strange behaviors so I ran the built-in diagnostic package which returned "No EEProm". The service manual says there is no EEProm connected. I approached Pioneer and they said to swap out the DSP board. All said and good but the DSP board is $860 USD. I am hoping someone can help me

      1). Understand the schematic and check the connections between the EEProm and DSP
      2). Check the functionality of the EEProm

      I don't know if this is the unit's problem but it's a place to start.

      I have little to no electronic experience...
      6 Photos
      04-08-2024, 05:32 PM
    • BMCappelletti
      Lenovo Thinkpad E14 Gen3 stuck on "To interrupt normal startup, press Enter" screen
      by BMCappelletti
      Hi everyone.
      Lenovo Thinkpad E14 Gen 3, stuck on the "To interrupt normal startup, press Enter" screen.
      Found a lot of people with this issue, but with no definitive answer. Some people managed to get away accessing BIOS, going to Startup and turning off "Option Key Display". For me that only removed the interrupt normal start up message, leaving only the Lenovo logo.
      Most people say hitting Enter does not work. It's true, if you wait a few seconds. But if you hit Enter right away you get the options to enter BIOS (which works), run diagnostics (goes to a...
      02-18-2025, 12:22 PM
    • edgarmg15
      Damaged EEPROM on TV Vizio E320-A0
      by edgarmg15
      Hi everyone

      Iยดm trying to repair a TV Vizio E320-A0 that I found in the street

      The symptoms are it doesn't respond with remote or buttons, the LED indicator is always off and also there is no image on the TV.

      The power supply board works fine (I probed the terminals with my multimeter) but in the main board the EEPROM doesn't works correctly because the voltage on the pins doesn't match with the parameters of the datasheet.

      So, Iยดm going to replace the EEPROM with a new one, but the problem is that my programmer (CH341a)...
      11-19-2022, 03:46 PM
    • Loading...
    • No more items.
    Working...