Panasonic TC-L47E50 - No Picture - Steady red light

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Dave Wave
    New Member
    • Jan 2014
    • 2
    • USA
    #1

    Panasonic TC-L47E50 - No Picture - Steady red light

    Hi,

    I have a Panasonic TC-L47E50. TV turns on with remote...red light comes on steady...in a few seconds the backlight comes on. The red light stays on steady and I cannot get any menu or picture. I have tried resetting (factory)it in the blind and leaving it unplugged overnight with no change. Any ideas were to start on this one?

    Thanks,


    -Dave
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • PNI E.
      tcl u65x9006 back light on but no picture sounf ok after 40 50 secs
      by PNI E.
      hi guys, i need your help again...i have tcl u65x9006. while i was watching it become darker like when a movie ends, little by little the image disappear. now if i turn on i have back light on, after like 1 min i have also sound but no picuture. the back light is on i take off one at time the ldvs but nothing change always no picture. i tried to cover with a piece of paper the pin of ldvs i cover like 7 8 pins but nothing worked. the tv stay with no picture. there is a tcon board.i checked the voltage there on the fuse i have 11,8 volts. there is caps in shorts on the exit of the tcon i have...
      02-20-2025, 08:36 AM
    • koby058
      vostro comes up with back light but no picture
      by koby058
      Hi people!!
      The owner said it showed bad picture once in a while (attached)
      I see that there is back light but no picture.
      I want to ask if it is possible to disable the NVIDIA GPU and use the intel one?

      Also attached schematic and BDV

      LINK to schematic & boardview - https://www.badcaps.net/forum/troubl...ll-vostro-5590...
      07-13-2025, 01:03 PM
    • kca
      Samsung UN60F8000BFXZA ~ No Picture or Sound - 5 Res Light Blinks
      by kca
      Hello all ~

      I’m working on this Samsung 60” LED and purchased a new main board a couple of days ago that did not fix the 5 blink issue. The original main board’s HDMI ports (all 4 of them) failed to work and no amount of reflow remedied that.

      This 5 red light blink code on the front panel LED is followed (about 15-20 seconds afterward) by an automatic reboot, and results in 5 more red light blinks. Then the entire cycle repeats itself indefinitely.

      No picture. No sound.

      I tested all the voltages coming out of the power supply...
      10-12-2023, 05:23 PM
    • FZG
      Panasonic AG-1000B VHS player with bad picture quality
      by FZG
      Hello!

      I recently got an old VHS player from Panasonic and just for fun I want to try to repair this device. It is an AG-1000B portable VHS player from 1990 and it has a problem with picture quality in playback mode.

      Picture in playback mode is very noisy and often loses sync but the still images are nearly perfect.

      I want to know, is this something that could be solved by recapping or is the video head likely gone?

      Also, what mechanism is this?

      Any feedback is appreciated!...
      05-06-2024, 07:16 AM
    • slimsoul
      Samsung TV`s UE32J5500AK and UE48H6400AK Red Standby Light - No Picture/Sound
      by slimsoul
      Hi, I'm new here and looking for some advice on how to diagnose an issue i have with 2 samsung TVs.

      I have a UE32J5500AK and a UE48H6400AK both with the same issue of red light but nothing happening on the screen, the red light responds to remote or button press by flashing once but stays red. I have searched forums but most turn up a blinking red light.

      I have tried replaceing the power board on the UE32J5500AK last year but this resulted in the same outcome.
      The UE48H6400AK recently developed some small bright areas on the screen, then last week would not power...
      03-12-2024, 03:55 AM
    • Loading...
    • No more items.
    Working...