general panasonic plasma setting question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • freakaftr8
    Badcaps Legend
    • Oct 2012
    • 3743
    • USA

    #1

    general panasonic plasma setting question

    hey guys what I have is a panasonic plasma and while watching movies on hdmi or any input for that matter my TV I had set up in my bedroom was a TH-46PZ80U and durung black scenes like before commercials when does screen goes black it actually act like it turned off the panel I never got inside to figure out why it did that but I kinda liked it it actually made it pitch black but with the other Panasonics I have when the screen goes black before commercial the screen is still definitely lit . Is there a setting that makes the screen go completely black before like this TV did. I hope I explained it right
    Did I leave the soldering iron on?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: general panasonic plasma setting question

    Turn it from Dynamic/Vivid, a horrible mode IMO, to Cinema/Natural if you want that feature disabled.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • freakaftr8
      Badcaps Legend
      • Oct 2012
      • 3743
      • USA

      #3
      Re: general panasonic plasma setting question

      Oh lol I didnt know it was that easy. Vivid looks washed out on any panasonic plasma anyway. Im using game mode now.
      Did I leave the soldering iron on?

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: general panasonic plasma setting question

        Game mode turns off a lot of processing to improve response time, but at the penalty of picture quality.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Related Topics

        Collapse

        • Alicat
          Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
          by Alicat
          Hello,

          Stopped by this site trying to fix my parents Panasonic Plasma TV.

          Model number is TH-50PZ85U

          Power comes on and the red power light stays on solid.

          Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

          I also hear a few clicks.

          I also think my parents said there was a thunderstorm and the TV failed after that.

          Section 6 in the service manual talks about power and no screen,...
          10-30-2024, 10:09 AM
        • Zelek11
          Panasonic Plasma screen interference on left half of screen
          by Zelek11
          My Panasonic Plasma model P55VT50 has started displaying "interference" on just the left half of the screen only (left when facing the screen). Sometimes it's concentrated in about the first 30 seconds after startup, then disappears. Other times it's fine at startup and then randomly does it later on. When it flashes the interference it's very quick and doesn't stay on the screen unless it flashes repeatedly in a row.



          This image is a screen shot from a video I took. This is an example of the interference at its worst. Often the interference is much smaller...
          10-14-2022, 04:54 PM
        • renech
          panasonic TH-42PC77U plasma television half screen problem
          by renech
          hello,
          I hope someone on this forum can assist me.
          I have a panasonic TH-42PC77U plasma television.
          the lower 1/2 of the screen has become flaky....in and out, then finally goes black and you can only see the top portion.
          i have performed the reset to default settings quite a few times. Panasonic recommended..did not believe this would help...it didn't.
          I have removed the back panel and looked around for something obvious...burn marks in a board, etc....nothing obvious...
          I have read some posts that suggest the problem is related to the boards on the left...
          12-12-2022, 06:53 PM
        • Ryan.man
          Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
          by Ryan.man
          Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

          My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

          This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
          02-04-2025, 12:23 PM
        • Chrissygizmo
          Panasonic TX-48CX350B backlights but white screen , blank screen
          by Chrissygizmo
          Hi all, I’ve got a problem I hope someone can help me fixi.
          I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
          01-11-2025, 03:18 PM
        • Loading...
        • No more items.
        Working...