LG 42PX4D-UB No Picture, Sound works

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gingerbreadman
    Member
    • Sep 2013
    • 36
    • United States

    #1

    LG 42PX4D-UB No Picture, Sound works

    Hello Everyone,

    I just picked up an LG Plasma 42". As the title says there is no picture but the sounds works.

    At this point I'm thinking it's the IPM on the Ysus board. There was a blown fuse on the ysus board. After having the tv on for a bit the xsus board IPM heatsink was warm while the ysus one stayed cool. The screen seems to be completely black, no flashes, lines or anything.

    What are your thoughts?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: LG 42PX4D-UB No Picture, Sound works

    Y-sus IPM seems likely. Do check buffers for shorts before though.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • gingerbreadman
      Member
      • Sep 2013
      • 36
      • United States

      #3
      Re: LG 42PX4D-UB No Picture, Sound works

      Thank you Tom66.

      I installed the new IPM on the ysus board.
      The tv now turns on but the picture only works on the left side of the screen.
      I'm going to recheck all my cable connections.
      Any ideas as to what's causing this?

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: LG 42PX4D-UB No Picture, Sound works

        Check the cables on the control board are seated properly.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • gingerbreadman
          Member
          • Sep 2013
          • 36
          • United States

          #5
          Re: LG 42PX4D-UB No Picture, Sound works

          It works now! I missed hooking up a cable that was hidden underneath another board.

          Comment

          Related Topics

          Collapse

          • Tynan Dill
            Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
            by Tynan Dill
            I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

            Upon bringing it home and plugging it up, it showed a standby light.

            I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

            The screen seems to blackout and stay black, but with a flashlight I can see the display.

            With my Playstation 4 connected via HDMI, and running a game I can hear sound.

            Assuming...
            11-22-2024, 01:46 PM
          • TR103
            Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
            by TR103
            Hi, I have a Samsung UE50TU with:
            - sound and backlight, but no picture
            - when it arrived, it had a picture for a few seconds
            - it keeps rebooting
            - without ribbon cable between the two panel boards, it does not reboot but I have no picture
            - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
            - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

            - without cable between mainboard and lcd panel and with a jumpered...
            01-22-2025, 04:12 PM
          • ex250
            Kenwood SW-505D no sound issue and pops from time to time when it works
            by ex250
            Hello mates,

            I bought this subwoofer a few days ago used and blind and it works erratically, as far as I could see, it has been tampered with, the speaker is not the original one and of 8 Ohm when it should be of 4, and there are some welds like reworked by the boards.

            It doesn't have much power (expected more from it) and it distorts if you increase the volume over the middle, maybe it's because of the high impedance of the speaker. The problem is that it has sound when it wants, the led panels all work correctly, you can hear the power relay on power on, but right now...
            12-29-2024, 03:27 PM
          • Ierwin
            Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
            by Ierwin
            Hello everyone,
            Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
            The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
            He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
            I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
            Anyway I still fully expect that there has been something seriously damaged...
            05-13-2025, 03:31 PM
          • Exim
            ASRock N100M, no picture no boot, but semi-alive
            by Exim
            Hi guys,
            I managed to semi-kill an ASRock N100M board after updating Bios from 1.10 to 2.01. It's a zombie now, dead, but not dead.

            ASRock N100M special features:
            - CPU soldered to board, small Intel 12th gen
            - iGPU
            - four POST LEDs

            Problem after updating Bios to 2.01 using the in-Bios update tool: no picture, no boot.
            I am not sure anymore if it booted at least once successfully after updating the bios to 2.01, maybe not, I can't remember. I think it did not.

            Symptoms:
            - no picture/signal on any of the display connectors,...
            04-01-2025, 02:36 PM
          • Loading...
          • No more items.
          Working...