Need help dismounting my PSU from TV.... :S

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • joyride
    Member
    • Apr 2013
    • 39
    • USA
    #1

    Need help dismounting my PSU from TV.... :S

    So I need to dismount the PSU from my tv so i can work on it...

    How do you disconnect these cables?These are the only things preventing me from getting the PSU off..

    Id tried gently pulling on the cables and that didnt work...

    Heres the pic...
    Attached Files
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Need help dismounting my PSU from TV.... :S

      Press clip down and pull connector out.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • jinu_j
          Query on preventing reverse flow
          by jinu_j
          Hi Folks

          I need your help in a design problem. I have a power source that provide 3.3V, 5 V, +12V, and -12V. Each output is rated at 5A individually. Now i need to create a 4 way switch which will allow me to select the output I want. Unfortunately cannot find a 5 way rotary switch that can handle 5A. The ones i find are too big and used for main electricity board. Hence not suitable for my project.

          So what i was thinking was to do the following
          - Use normal 5 way rotary switch rated for 500mA.
          - Connect the output of this to 4 channel 5V relay. So...
          02-12-2022, 12:33 AM
        • lti
          Preventing Windows 10 from installing stuff without my permission
          by lti
          I just mentioned that my laptop keeps reinstalling Dolby Access at random. The Internet seems convinced that this program does nothing, but there is an audio control panel inside it with some "enhancements" (as I mentioned here) and the latest version of the software doesn't seem to let you completely disable the bullshit like the old version could. Does anyone here know how to prevent Windows 10 from reinstalling the built-in "apps" after I uninstall them?

          Before some troll tells me to switch to Linux, the audio under Linux on this laptop is actually worse (at...
          06-19-2021, 07:07 PM
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • fredtred
          Physically bending the T-Con board creates horizontal dotted lines on OLED55CXPUA
          by fredtred
          Hello!
          I have been trying to solve this issue the past 12 months to no avail. I have been a lurker here during that time but finally decided to post my problem and see if anybody knows a solution.

          Problem
          My tv (OLED55CXPUA) has an issue where it displays horizonal lines of dotted artifacts.

          (See Attachment 1)

          Self Diagnosing
          After a very long troubleshooting period I traced the issue to the T-Con board. If I gently flexed/bend the board I could make the display go from GOOD to BAD and vice versa. I have ruled out the connectors/wires...
          10-29-2023, 01:09 PM
        • elmark
          HP 15-cw1002ua strange keyboard issue
          by elmark
          HP Pavilion 15-CW1002UA
          S/N 5CD0251CBC
          P/N 7KE54EA

          Hello guys!
          I have a strange issue with my laptop keyboard and I'm lost trying to detect what's wrong - the KB9028Q-C or the keyboard itself.
          It powers on OK and has no other issues except the following:
          • CAPS LOCK does not work at all
          • Fn button toggles Flight Mode
          • When I press 't' or '5', it produces 't5', and when I press 'y' or '6', it produces 'y6'
          • (with SHIFT pressed: 't%' and 'y^' respectively)
          I initially thought it was a keyboard malfunction (internal short, etc.),
          but when I press and hold...
          06-27-2025, 01:10 AM
        • Loading...
        • No more items.
        Working...