Samsung Plasma Black vertical bar on left side

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 2hamburgers
    Member
    • Apr 2013
    • 20
    • USA
    #1

    Samsung Plasma Black vertical bar on left side

    Model number s42ax-yb07, mfg:2009. So here is another broken TV i bought that I already repaired once. I bought this tv with a now power issue and ended up replacing the X-main (only) with an ebay card. It worked great and I sold it to a friend. About a month later it started doing this. Visually, everything looks ok under the back cover. What say you BC Forum?
    Attached Files
    Last edited by 2hamburgers; 04-26-2013, 03:26 PM. Reason: spelling
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Samsung Plasma Black vertical bar on left side

      Either a loose connector on the appropriate X DRIVER connector.
      Or the plasma panel is bad.

      Make changes only to these connectors while the TV is unplugged, failure to observe this may lead to damage to the panel.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • JesusJones
          Samsung Plasma Intermittent Vertical Bars (repeatable) PN50B430
          by JesusJones
          Trash picked this plasma for parts and found it had some bad solder joints. It powered on after reworking most of the boards and seems like it may even work.

          The symptoms is, when showing a picture of bright (mostly white) intensity (within the affected area only) a vertical strip 2 3/4" wide will begin to fuzz out (just to the right of samsung logo, 16 3/8" from screen edge), and soon turns black (from top to bottom). Changing to a darker scene immediatley ater will cause the black stripe to fade back in (it fuzzes and clears up again) and it starts working just fine....
          04-13-2021, 01:45 PM
        • LanTHrusteR
          SAMSUNG PLASMA TV PS51E550D 1W shorted BDXXX on board
          by LanTHrusteR
          SAMSUNG TV PS51E550D 1W,
          Symptoms: the panel is on but no picture, fuzzy color vertical lines at the black background at both sides of the panel. Very similar to this:


          Disconnecting left side of the panel fixed the right side which went on and displayed picture although with vertical black bars coming from the middle X-BUFFER panel at the bottom of TV and the same 1 fuzzy color vertical line ~ 0.11 inches long and a few 1 pixel black bars. The disconnected left side showed fuzzy colorful bars, may be some glimpses of the the correct image from menu at the right side...
          07-13-2022, 06:47 AM
        • howardc64
          Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
          by howardc64
          • Prior owner tried a replacement main board. No difference.
          • Samsung 2x red blinking standby LED = panel fault
          • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
          • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
          • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
          ...
          07-19-2025, 10:54 PM
        • thetonywarren
          Samsung PN51E450 Plasma Vertical Lines
          by thetonywarren
          Friend of mine has a Samsung Plasma panel with some vertical lines that are starting to form on the screen.....Ive never worked on a plasma panel, so Im not sure what to look for, would this typically be a main board issue, or something else?

          Any help would be appreciated.....Please let me know.......
          02-14-2022, 01:23 PM
        • Loading...
        • No more items.
        Working...