Lava LD40-LVB silent clicking psu

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 982
    • Sweden
    #1

    Lava LD40-LVB silent clicking psu

    This unit came in completely dead with just a silent ticking, like psu hickup mode. Haven't seen this psu before so I begin to check with you guys first.
    The usual probing around in the psu reveals no shorts. May it be a startup cap issue perhaps?
    Attached Files
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Lava LD40-LVB silent clicking psu

      That's often the case - check the voltage across startup cap to be sure.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Document Archive
          MSI Cubi 3 Silent S-018US 4415U Specification for Upgrade or Repair
          by Document Archive
          This specification for the MSI Cubi 3 Silent S-018US can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Cubi 3 Silent S-018US boardview and Cubi 3 Silent S-018US schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-12-2024, 03:28 PM
        • slimmy182
          [SOLVED] M1 MacBook Pro clicking sound logic board 5V no power on A2338 820-02020
          by slimmy182
          Hello, I bought this Mac from a friend, he said that it simply stop working. The MacBook looks very clean but does not power on, stuck on 5v 0.42A, and sometimes display 5V and 0A (then 0.071A and again 0A).

          I opened it looking for some problem, it was not touched before for sure and the board is very clena, no spot of corrosion at all from what I can see. Voltage on multimeter of the board off the case it's the same, 5V 0.42A. But then I noticed this "clicking sound" come from the board ( I attached here the audio file).

          Looking on google I found this:...
          01-14-2023, 11:55 AM
        • BMCappelletti
          Lenovo Thinkpad E14 Gen3 stuck on "To interrupt normal startup, press Enter" screen
          by BMCappelletti
          Hi everyone.
          Lenovo Thinkpad E14 Gen 3, stuck on the "To interrupt normal startup, press Enter" screen.
          Found a lot of people with this issue, but with no definitive answer. Some people managed to get away accessing BIOS, going to Startup and turning off "Option Key Display". For me that only removed the interrupt normal start up message, leaving only the Lenovo logo.
          Most people say hitting Enter does not work. It's true, if you wait a few seconds. But if you hit Enter right away you get the options to enter BIOS (which works), run diagnostics (goes to a...
          02-18-2025, 12:22 PM
        • beetle1303
          Carver CM-1090 - Power relay clicking on & off, then fuse blown after 20-30 seconds of power cycling.
          by beetle1303
          I gotten a Carver CM-1090 amplifier from a friend who has kept it in storage for decades. Opened it up, thick layer of dust cumulated everywhere. Vacuumed it semi-cleaned, and blown off as much as possible the remaining dust. This is a 220V version.

          On initial powered up with nothing connected - it works with all the lights and button indicator lit up as pressed, etc. I then powered off, connected a CD player into the CD RCA input and powered it on. It seemed to work for a short while and when I turned the volume up and down to see the the VUs works, the power started to clicked off...
          3 Photos
          01-13-2025, 08:49 PM
        • survivalbloke
          Macbook A1398 - no startup chime, no boot, but have fans and CPU warm
          by survivalbloke
          Macbook A1398 - had repeating loop of startup chime with no actual boot. Just startup chime, then restart, start up chime, then restart, etc. I pulled the battery and cleared BIOS. It will now power up, fans on, CPU warming, but no startup chime and no boot. I reflashed the BIOS chip but the same thing happening. Where should I go from here?
          06-14-2023, 11:45 AM
        • Loading...
        • No more items.
        Working...