With the audible meter make sure that you get a very fast tone when touching the leads, that is, it does not have an awful delay, like one meter I tested... https://www.youtube.com/watch?v=53L0lgmHKWQ
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Ok I took the boards to my dads place he had a audible tester and yes buffer had shorts in a few places possible from y main having a short and it being turned on and off constantly from previous owner of set ?
Carefully inspect the panel for cracks. A cracked panel can cause shorted buffer lines.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
Just check the edges for hairline cracks with a torch. If there are no cracks, then I would suggest that a replacement buffer and Y-main would sort it.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
So I need to take panel completely apart ? And a torch why would I put a torch anywhere near this tv ? I know u said the gases n all .. Imma wait for ur response on this to confirm this
LOL, misunderstanding between the Queen's English and US English, I guess. Torch = Light = Flashlight etc.
You can check with the frame on.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
LOL ya see why i confirmed this i didnt wanna put my blow torch on the glass X.X , anyway ill go check with my Iphone flashlight and see , CROSSING FINGERS X.X
ya theres no cracks or anything really , just a few "Hairs" from i suppose particles floating in my shop area but it loooks flawless on panel u can see each little pixel board
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
ya to return the NEW PSU and get credit im looking at 2 weeks roughly and i live in texas
... thinking of just keeping new PSU putting it back in and getting new parts just to say ya its all NEW junk hehe , another 44 $ puts it at 102.32 $ total for tv
Just as a note, I have not yet seen any of these power supplies fail on these panels ... always the X-main or Y-main boards.
Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
For service manual, schematic, boardview (board view), datasheet, cad - use our search.
ya to return the NEW PSU and get credit im looking at 2 weeks roughly and i live in texas
... thinking of just keeping new PSU putting it back in and getting new parts just to say ya its all NEW junk hehe , another 44 $ puts it at 102.32 $ total for tv
If your looking at that maybe the complete kit at SJ $124 for the K1 version- 1 only
Comment