Phillips (42PFL5432D/37) power button blinks/loud chirping

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dfraire21
    New Member
    • Mar 2013
    • 1
    • usa
    #1

    Phillips (42PFL5432D/37) power button blinks/loud chirping

    I have a Phillips (42PFL5432D/37) when I turn it on the power button light blinks rapidly and it begins to chirp rather loud. I replaced one cap on the PSU (the top right 2200uf). It was the only one that was bulged out. After replacement still got the same issue. Should I replace the other 3? Or is it anything else on the PSU that needs replacement. Any info would be great

    Thanks,
    D
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Phillips (42PFL5432D/37) power button blinks/loud chirping

      Originally posted by dfraire21
      I have a Phillips (42PFL5432D/37) when I turn it on the power button light blinks rapidly and it begins to chirp rather loud.
      Search this forum for the word "chirp" and test your diodes.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Biruslapio
          Panasonic P58V11B 8 and 12 blinks error "fix"
          by Biruslapio
          Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

          Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
          04-13-2021, 07:13 AM
        • aidanmo
          Philips 43PUS7506/12 - Loud blown out sound
          by aidanmo
          Hello,

          I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
          I thought maybe the speakers got damaged, so I replaced them - no dice.
          • Using the internal speakers, it always happens.
          • Using the headphone jack, it never happens.
          • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
          ...
          02-28-2025, 03:13 PM
        • tester001
          PLP-60-48 Single Output LED Power Supply - "chirping" noise
          by tester001
          Dear Badcaps forum members,

          Hope that you are all well!
          I am a newbie on a mission to figure out the cause of the PSU making a "chirping" noise:


          Having searched for this symptom online I have found some indication that failed capacitors may be an issue. To help with the troubleshooting, I have tried to isolate the problem and disconnected the PSU from the rest of the device - the chirping remained.
          I have then found that the whole PSU (apart from a small add-on board) can be replaced, and there is even a datasheet for it: https://cdn.badc...
          12-06-2023, 06:39 AM
        • Andre Gilbert
          Panasonic TC-P55ST50 8 blinks then no blinks
          by Andre Gilbert
          Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
          Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

          TV Model: Panasonic TC-P55ST50
          ...
          1 Photo
          11-20-2024, 08:52 PM
        • Taurus12
          Optiplex 3050 micro 2 blinks followed by 3 blinks issue
          by Taurus12
          Does anyone have an idea of what might be the issue with my 3050 micro? I have tried replacing new cmos battery but still the same

          I am not sure if its the powersupply that I'm using is the issue since its the original powersupply. its a laptop powersupply with the same specifications with the 3050 micro so i guess it should be fine.

          i also tried replacing the bios but with no avail, everytime i try another bios it gives a different blinking lights

          Any recommendation on what I have to do next? Thanks in advance
          06-10-2025, 05:05 PM
        • Loading...
        • No more items.
        Working...