LA40N81B Clicking problem

Collapse
X
Collapse
+ More Options
Posts
 
  • Time
  • Show
Clear All
new posts
  • Pete743
    New Member
    • Feb 2013
    • 1
    • New Zealand

    #1

    LA40N81B Clicking problem

    I am very new to this. My Samsung 40" LCD cycles through but doesn't turn on. It looked to me like the "Click of Death" so I went ahead and replaced the capacitors. They however didn't look swollen to me.

    This was unsuccessful so I decided to replace the whole powerboard. Again this has been unsuccessful as the TV's LED light still flashes red about 5 times then the TV ticks and then flashes 2 times and ticks the repeats the cycle..

    Any help would be appreciated.
    Thanks
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: LA40N81B Clicking problem

    I've worked on the LE32N73 which I believe to be similar, and it was a defective main board. Unfortunately the main board for mine was unobtanium, so I sold the TV on.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    Related Topics

    Collapse

    • theone111
      Problem with LG Plasma 60PM6700 - Random power downs
      by theone111
      I have an LG Plasma TV 60PM6700 for the past ~12 years.

      In the last ~3-4 months I have been having some issues.
      1. Problem: It started with random picture disappearing (sound still worked).
        Frequency: Happened about once a week.
        Solution: Had to turn off TV wait a few seconds before turning it on again.
      2. Problem: Then it got worse and the TV started to shut down and when turning on the no picture just sound.
        Frequency: Happened about once a week.
        Solution: Had to turn off TV wait about 10-20 seconds and turn it on again to solve.
      3. Problem: TV shuts down
      ...
      07-22-2024, 10:36 AM
    • ayecrut
      Problem switching on LG TV, red LED flashes 3 times
      by ayecrut
      Hi everyone,

      I have picked up an LG brand television, manufactured in 2014. The model is LG-49UB850V / LG-49UB850V ZD (Link).

      When I tried to start it the first time it didn't work, the screen remained black and the red LED blinked 3 times or just stayed on all the time. After moving it and plugging it in somewhere else, it restarted once or twice, but since then it hasn't started with the same symptoms.

      Other information:
      - The physical button that turns on the TV without the remote doesn't seem to work. Nothing happens when you press it, we can only...
      02-09-2024, 05:25 PM
    • Zeonalbasta
      Thinkpad X1 Carbon "LMQ-1MB 12298-2 48.4LY26.021" VCC3M problem
      by Zeonalbasta
      i have a problem with thinkpad X1 carbon gen 2 "LMQ-1MB 12298-2 48.4LY26.021"
      The laptop was turned off because the MOSFET was not transmitting voltage. After checking it turned out that the gate pin on the MOSFET was the problem, because it was producing an inappropriate voltage. and it was discovered that the problem was with the Think engine, so I decided to reprint each pin, and finally the mosfet could work properly. However, there is another problem, even though the voltage has been supplied to the laptop, it still won't turn on, there isn't even an LED indicator. After double...
      09-13-2024, 01:17 PM
    • perzyk23
      Lenovo T580 - LCD Panel problem - error 0288
      by perzyk23
      Good morning,
      I have a problem with Lenovo T580, which after error code 0288 suggests a problem with the display. I checked the display and it works on another laptop. I replaced the display cable with a new one. I programmed another BIOS (downloaded from this forum) and I still have the problem of a dead display - there is an image via HDMI, and the system does not detect the built-in LCD at all. The problem appears to be hardware. What can I check to confirm or disprove this? I found many threads on the Internet related to this problem 0288, but without specific solutions. Please advise....
      10-25-2024, 12:42 AM
    • SDNarcia
      Dell 15R-5521 keyboard problem (KBC?)
      by SDNarcia
      Hello, I have a Dell 15R-5521, with the problem that the Ctrl, Alt, Shitf and Num Lock keys do not work, I tested the keyboard with a keyboard tester and it is functional, I also got another new keyboard and the computer has the same problem with the same keys. Check continuity between the ZIF connector from the keyboard to the KBC and all pins are correct. I cleaned the ZIF connector and the KBC and I still have the same problem. I reinstalled windows just in case, and it didn't work. I updated the BIOS to the latest version A16 and there were no changes.

      As additional information,...
      07-20-2024, 10:47 PM
    • Loading...
    • No more items.
    Working...