Vizio E321MV

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keico
    Senior Member
    • Oct 2011
    • 52
    • United States

    #1

    Vizio E321MV

    Ok I am back again for some expert advice.

    Have a friend with a Vizio Model E321MV

    When you turn it on it act perfect

    After about 3-5 minutes you see these horizontal static lines. I think like 6 of them.

    Then the TV will shut off.

    After you wait a few minutes you can turn it back on but it just does the same thing.

    This is not my TV so i can post pictures maybe later.
  • martyparish
    Badcaps Veteran
    • Dec 2012
    • 313
    • United States

    #2
    Re: Vizio E321MV

    Possibly the tab bonds are coming loose as it heats up or maybe t-con. A can of freeze spray may help you isolate the issue. That's about all I can add, so hopefully a more experienced member can step in and add more!

    Comment

    • bmolke
      Member
      • Jul 2012
      • 21
      • usa

      #3
      Re: Vizio E321MV

      Has anyone figured out this issue. my vizio e321mv is doing the same thing. I am at a loss.

      Comment

      • Dgtech
        E. Technician
        • Apr 2009
        • 1462
        • Steeler

        #4
        Re: Vizio E321MV

        Originally posted by martyparish
        Possibly the tab bonds are coming loose as it heats up or maybe t-con. A can of freeze spray may help you isolate the issue. That's about all I can add, so hopefully a more experienced member can step in and add more!
        ... try this yet???
        The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

        Comment

        Related Topics

        Collapse

        • sam_sam_sam
          Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
          by sam_sam_sam
          This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

          I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

          I am comparing them to a brand new one that I installed

          The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

          I going to let it run for several days before I remount back on the wall next to the...
          09-05-2024, 06:48 PM
        • Document Archive
          HP ProDesk 600 G5 + APC Back-UPS 700VA ProDesk 600 i7-9700 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP ProDesk 600 G5 + APC Back-UPS 700VA can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + APC Back-UPS 700VA boardview and ProDesk 600 G5 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
          09-12-2024, 02:30 PM
        • Document Archive
          HP ProDesk 600 G5 + APC Back-UPS 700VA ProDesk 600 i5-9500 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP ProDesk 600 G5 + APC Back-UPS 700VA can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + APC Back-UPS 700VA boardview and ProDesk 600 G5 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
          09-12-2024, 02:30 PM
        • Document Archive
          HP ProBook 430 G7 + APC Back-UPS 700VA Notebook 400 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP ProBook 430 G7 + APC Back-UPS 700VA Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 430 G7 + APC Back-UPS 700VA boardview and 430 G7 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
          09-06-2024, 08:10 PM
        • Document Archive
          HP ProBook 450 G7 + APC Back-UPS 700VA Notebook 400 Specification for Upgrade or Repair
          by Document Archive
          This specification for the HP ProBook 450 G7 + APC Back-UPS 700VA Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 450 G7 + APC Back-UPS 700VA boardview and 450 G7 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that...
          09-06-2024, 08:10 PM
        • Loading...
        • No more items.
        Working...