Magnavox 42mf230a/37

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • 84TAVeRT
    New Member
    • Sep 2012
    • 4
    • USA
    #1

    Magnavox 42mf230a/37

    it just stopped working last week...

    no picture no sound

    led is red, push power button on remote or tv and led turns blue... have to unplug to turn off

    checked the y-sus and buffers for short both passed as non-short

    found a bulging cap on the y-sus and replaced it (no change)

    started checking voltages today...

    1. Check PowerSTB5V（U516 3PIN）
    Voltage: 5V (shows 4.95v)

    2. Check the REL-SW state of power IO
    interface，
    High Voltage：Turn on
    Low Voltage：Standby
    Test Point： C pole of Q5
    High Voltage：5V（4.2---5.3V）
    Low Voltage：0V

    I get 0 volts, so i am not coming out of standby

    what should i check next, this is my first plasma project...

    thanks,
    chris
    Last edited by 84TAVeRT; 01-24-2013, 09:02 PM.
    Tags: None
    • 84TAVeRT
      New Member
      • Sep 2012
      • 4
      • USA
      #2
      Re: Magnavox 42mf230a/37

      found another bulging cap on the main power supply

      also discovered fuse f5004 is blown on the y-sus

        Comment

        • 84TAVeRT
          New Member
          • Sep 2012
          • 4
          • USA
          #3
          Re: Magnavox 42mf230a/37

          components replaced...

          no apparent power on secondary side of main power board...

          what now?

            Comment

            • 84TAVeRT
              New Member
              • Sep 2012
              • 4
              • USA
              #4
              Re: Magnavox 42mf230a/37

              btw, f5004 was not blown...

                Comment

                • tom66
                  EVs Rule
                  • Apr 2011
                  • 32560
                  • UK
                  #5
                  Re: Magnavox 42mf230a/37

                  Can we see some pictures?
                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                    Comment

                    • Rhymemeister
                      New Member
                      • Feb 2013
                      • 3
                      • USA
                      #6
                      Re: Magnavox 42mf230a/37

                      Originally posted by 84TAVeRT
                      it just stopped working last week...

                      no picture no sound

                      led is red, push power button on remote or tv and led turns blue... have to unplug to turn off

                      checked the y-sus and buffers for short both passed as non-short

                      found a bulging cap on the y-sus and replaced it (no change)

                      started checking voltages today...

                      1. Check PowerSTB5V（U516 3PIN）
                      Voltage: 5V (shows 4.95v)

                      2. Check the REL-SW state of power IO
                      interface，
                      High Voltage：Turn on
                      Low Voltage：Standby
                      Test Point： C pole of Q5
                      High Voltage：5V（4.2---5.3V）
                      Low Voltage：0V

                      I get 0 volts, so i am not coming out of standby

                      what should i check next, this is my first plasma project...

                      thanks,
                      chris
                      I also have a 42inch Magnavox plasma I picked up for twenty dollars. It looks brand new inside and out but no power.I replaced the power board and another smaller power board but it just does nothing like it isn't even plugged in. There is power to the inlet, I know. All fuses check okay. but no power, no indicator light, nothing, Can anyone help?

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK
                          #7
                          Re: Magnavox 42mf230a/37

                          Is the model of your TV the same? Regardless, it would be best to create a new thread.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • PlasMatt
                              LG 60PV450 Possible Bad YSUS Need help confirming Diagnosis
                              by PlasMatt
                              I have an LG plasma that after reading through a bunch of posts and doing some testing I believe has a bad YSUS board. The problem is that that doesn't make sense to me for some of the symptoms. The problem started yesterday. While watching a movie the TV just shut down like I pressed power. I have it hooked to a PC and use RS232 to turn it off and on so I thought maybe something had glitched there. I turned it back on and finished the movie with no problems. The same thing happened today so I checked logs to see if something in the control glitched and sent an off command but it didn't, After...
                              09-20-2025, 06:50 PM
                            • tonybig10
                              Magnavox MDR515H/F7 And Magnavox MDR537H/F7
                              by tonybig10
                              Hi is any one can help me on getting the Schematics for Magnavox MDR515H/F7 And Magnavox MDR537H/F7 PDF file thank you I really appreciate it. Just need to change some component on
                              the main board and the power supply board. I looked all over for the internet and I cannot find the Schematics sheet for both of them. I don't know where else to look I hope someone can help me...
                              03-07-2025, 01:03 PM
                            • sam_sam_sam
                              Is there any high current pouch battery that are size 60mmX80mm maximum thickness 21mm for a battery operated tab welder
                              by sam_sam_sam
                              I have a battery operated tab welder and the battery does not have enough current for the battery tab welder because after about 30 welded it does not have the same current output it voltage has gone down by at least 0.500 volts or maybe a more than that

                              I can fit 21700 battery cells in the enclosure it is very tight fit for four of them that are 35 amp high current capacity 35X4=140 high current output this should work a lot better than what is installed right now

                              I tested the battery cells there are installed right now and they are testing good with no issues that I...
                              02-04-2025, 08:08 PM
                            • DynaxSC
                              Extreme High Current & Low Voltage Short Killer ??
                              by DynaxSC
                              Hi Folks

                              I'm looking for a extreme high current short killer solution for a reasonable cost.

                              I have an LGA1700 motherboard (ASUS PRIME Z790-P WiFi) where I exchanged the LGA socket already 3 times, and every time after the socket exchange I get a short of power supply lines VCORE (V variable) and VCCIN_AUX (1.8V).
                              After taking off the socket, the shorts dissappear again.
                              The soldermask on the socket is already partially demaged from the heat, so I have reconstructed the soldermask by manually painting the missing soldermask parts with a very small top of a...
                              10-15-2024, 10:13 AM
                            • harp
                              high voltage high resistance marking resistor
                              by harp
                              Is there any reason why high voltage high resistance resistor use weird marking and value on it? Standard nomenclature, EIA value not used?...
                              08-26-2024, 01:42 PM
                            • Loading...
                            • No more items.
                            Working...