Good place for parts.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • IamCanadian
    Senior Member
    • Nov 2012
    • 119
    • Canada

    #1

    Good place for parts.

    Not a huge range like SJ or anything, But free shipping and decent prices.

    http://www.plasmafix.com/forsale/ free shipping US and Canada.


    And free world wide shipping here.

    http://www.provodok.org/

    Was not easy to find, But a decent stock of the popular stuff, and from what I can see some great prices.
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: Good place for parts.

    I often use
    http://www.flattvparts.co.uk/

    and
    http://www.ebay.co.uk/

    The first usually has loads of parts -- and it's cheap -- but often sold out!! Nice high res pics of boards though, can help in identifying burnt components.

    eBay has almost everything but some people think their boards are worth a fortune. They really aren't.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    Related Topics

    Collapse

    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • kalilinux25
      where to find a good supplier for smd parts
      by kalilinux25
      Hoping to find a good laptop parts, battery, lcd , etc for bussiness, a small bussiness.
      08-12-2022, 09:38 AM
    • acedogblast
      Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
      by acedogblast
      This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

      There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
      11-02-2024, 05:13 PM
    • Dannyx
      Looking to buy a microscope
      by Dannyx
      Good day and a belated happy New Year folks !
      Wow....feels like forever since I've had a chat with all the wonderful folks we got here - guess you could say I grew up and can look after myself now
      In all seriousness, I'm in need of some assistance choosing a microscope. I decided it's time I finally got one and I might as well put some of the money I earned caroling this year to good use

      The reason I'm turning to our community for advice is because I'd like to hear some thoughts from people who actually own a microscope already or at least worked with them hands-on,...
      01-09-2023, 01:16 PM
    • xnRS
      Trusted place with good caps for CIS or from Ali
      by xnRS
      Well as I'm from CIS(Belarus to be exact) and little bit low at money - I need low delivery price combined with good caps price, so, is there some good trusted shop with low delivery price for CIS(or even this shop located in CIS), or some good shop at Ali where you can find some panasonics, ncc-ucc, nichicons, elna or sanyo.
      06-01-2021, 11:49 AM
    • Loading...
    • No more items.
    Working...