Thoughts needed on this plasma

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lilmonk3
    Badcaps Veteran
    • Apr 2012
    • 259
    • USA
    #1

    Thoughts needed on this plasma

    Friend just texted me a pic of this panasonic plasma thats at a garage sale.. Any thoughts on what MIGHT be the problem ? Owner said only thing that comes in clear is the words/numbers and the pictures from the sd card reader
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: Thoughts needed on this plasma

      "A" board problem.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • lilmonk3
          Badcaps Veteran
          • Apr 2012
          • 259
          • USA
          #3
          Re: Thoughts needed on this plasma

          The model # is th58pz700u but I looked around online and dont see any reference to A board.. Trying to decide if I should try to buy this TV..

            Comment

            • lilmonk3
              Badcaps Veteran
              • Apr 2012
              • 259
              • USA
              #4
              Re: Thoughts needed on this plasma

              Tom.. Maybe the D board http://www.shopjimmy.com/panasonic-t...tu-d-board.htm

                Comment

                • cadiman
                  Badcaps Veteran
                  • Mar 2010
                  • 397
                  #5
                  Re: Thoughts needed on this plasma

                  I pay very little for tvs anymore.

                  The fact that the tv panel is working you just need to fix the timing control issue.

                  A garage sale implies cheap so I am sure it is in the proper price range.

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK
                      #6
                      Re: Thoughts needed on this plasma

                      Nah since the OSD's good, it's gotta be on the board with the video inputs on it. I'd pay at most £50 for that TV.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • chazh
                          LG 60PS11-UA 60-inch 1080p Plasma TV-service lit & video help needed
                          by chazh
                          This is my first posting, so forgive me everyone in advance if I made mistake(s) in my posting.

                          I know there have been much about this plama tv already and I have read through most what I could find. However; I still have not come across any service lit/schematics for this tv. I even looked for the 50PS11 which would be basically relevant other than display size. Anyone know to find the documentation would greatly be appreciated.

                          The set that I have has issues with lower third of screen being dimmer than the above portion. From my past experiences with tube, solid state,...
                          09-01-2025, 08:56 PM
                        • SACR
                          Panasonic Plasma TH-P42X28K A-Board @ Mainboard Schematic needed
                          by SACR
                          I need Schematic A-Board @ Mainboard for Panasonic Plasma TH-P42X28K. Code : TNPH0842. I want to replace 1 MLCC but I don't know values (capacitance & voltage) & codes. Can someone help me? Thank you...
                          11-20-2023, 11:53 PM
                        • sam_sam_sam
                          Lift Master garage door opener with WiFi capability application through your phone
                          by sam_sam_sam
                          I had a lot of trouble with the WiFi connection from my router inside of the house into a ( new ) metal garage I had to run a 150 ft cat6 patch cord so the WIFI connection would be strong enough for the WiFi connection on the garage door opener would work correctly ( my son has a work out area in the garage as well and he was having to put his phone near the door to be able to stream music ) ( so I was going to eventually put WiFi out there anyway )

                          This garage door opener WiFi is very touchy if you lose the power it does not remember the password for the router which is weird or...
                          01-21-2023, 08:31 PM
                        • sam_sam_sam
                          Linear Garage Door Opener Control board took a crap install a new control board back normal
                          by sam_sam_sam
                          I have been having issues with this garage door opener for a while first the range of the remote was a lot less and sometimes it would start to go down and stop for no reason that I could find and would every once in awhile to start with then it started going more frequently until last Saturday when I opened the garage door it refused to close so I cranked up force all the way maximum limit this did not work also the sensor on one side that has a green and red lights that are supposed to be on when the door is open and there are no obstacles in the way on the original board the only light that...
                          02-08-2025, 06:52 AM
                        • sam_sam_sam
                          Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
                          by sam_sam_sam
                          This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

                          I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

                          I am comparing them to a brand new one that I installed

                          The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

                          I going to let it run for several days before I remount back on the wall next to the...
                          09-05-2024, 06:48 PM
                        • Loading...
                        • No more items.
                        Working...