Cap Identification

Collapse
X
Collapse
 
  • Page of 3
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 template Next
  • phantom_zero
    Member
    • Mar 2015
    • 13
    • Philippines
    #41
    Re: Cap Identification

    Been a long time since my last post here... The 5 piece series connected 330pF/2kv I used as replacement are still holding out pretty well to this day.

    One thing I want to do though is to convert the backlight to LED. Has anyone here already tried that?
    Last edited by phantom_zero; 01-18-2017, 11:35 PM.

      Comment

      Previous 1 2 3 template Next

      Related Topics

      Collapse
      • chth96
        Is it possible to test small ceramic disc capacitor with analogue meter?
        by chth96
        I read EBOOK of Testing Electronic Component and found that

        "In order to test the small blue resin coated ceramic disk capacitor which has 104 50v specification,it is possible to test this small ceramic capacitor by making use of analogue meter.
        Set to times 10Kohm that has 12v output from the probe to check disorder of ceramic capacitor.
        It is not uncommon that testing result of digital capacitance meter is okay,But It show shorted reading when you check it with analogue meter."

        Is it really possible to test small ceramic disc capacitor with analogue...
        03-09-2024, 10:03 PM
      • ITF
        Vizio D55un-E1 burnt ceramic capacitor identification
        by ITF
        Hey, I'm extremely new to TV repair. Long story short, TV popped when I turned it on, opened it up, located the burnt ceramic capacitor, but the label with the info on it was burnt out. I don't know much about this stuff, so I was wondering if anyone could give me some info on the capacitor I would need so I could solder in the new one. The nearby capacitors have the labels on them, but they vary. The power supply board part # is: PLTVHU401XABV The board location number of the capacitor is C9100 and it is almost dead center on the board....
        04-01-2020, 02:44 PM
      • Shulgin
        Acer predator XB241YU Component identification
        by Shulgin
        Hello everyone,
        I have a problem with my Acer predator XB241YU screen. When I plug it in, the startup LED turns on instantly, and I can't turn off the screen without unplugging it.
        After disassembly and inspection of the electronic cards I found what looks like a broken inductor, it is marked with the letter A and is at location L58.
        In the first photo you can see the broken component, in the second photo you can see where it is on the board, in the third photo you can see the silkscreen and in the fourth photo you can see the identification sticker of the main board
        I...
        4 Photos
        05-11-2024, 11:06 AM
      • thebomb602
        ASUS GA402R IC identification
        by thebomb602
        Hey guys! my name is kyle, new to motherboard troubleshooting and a little confused still on chip identification if yall could help identify this chip..
        also if you could teach me how to fish on this particular topic... i did read through the ic identification sticky, and couldnt identify this with that info... thanks!

        EDIT, just realized thats a 5 and not an S in the first line... finding results for it now. cant figure out how to take down thread so im not embarrassed...
        11-21-2023, 02:30 PM
      • Tend0
        hp elitebook 840 G4 no 5v IC identification
        by Tend0
        Hello everythone

        i have on the bank hp elitebook 840 G4 6050a2854301 mb a01 missing 5V cause IC is damage on this board 5V and 3V IC is separatly
        i have 3V but no 5V i found 5V IC damage . i need our help to find IC identification, the 3v ic has mentionned ALVH 572 i found reference but no see something like IC . I poste the 3V here if someone have is reference. i don't found motherboard schematique or boardview...
        05-31-2025, 09:13 PM
      • Loading...
      • No more items.
      Working...