Sanyo DP50747 screen problems

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SniperMatt59
    New Member
    • Aug 2012
    • 2
    • United States
    #1

    Sanyo DP50747 screen problems

    Hi, I am new to the forum and saw another thread similar to this one on here but with different circumstances so I figured I would give it a shot on here since you seemed to know what you were talking about.

    Well I recently made it back from vacation and I went to turn on my sanyo plasma tv and it is very dark. You can see very little on it (what you can see is a little bit mainly on the top right in black and white). The sound still works. I read that these Sanyo plasma tv's have problems with their y sustain boards. So my question is that what you think is wrong with it and what do I need to buy to fix it?

    I have already checked the fuses, and all of the caps look good along with everything else (no burn marks)

    Thank you in advance for your help.
    Tags: None
    • Slottech
      New Member
      • Aug 2012
      • 1
      • USA
      #2
      Re: Sanyo DP50747 screen problems

      Look in to the board on the left. I had almost same issues. you might get lucky and find one on ebay but I purchased from shopjimmy.com. I could not find any schematics for this board or the one on the right side or the power supply (top middle)

      Good Luck

        Comment

        • c10racing
          New Member
          • Jan 2013
          • 1
          • u.s.a
          #3
          Re: Sanyo DP50747 screen problems

          hi, i have the same problem with my 50 inch sanyo plasma tv. all the caps are good, fuses, nothing burn. just one of my fuses in the power supply has no power. there are two fuses in the corner of the power supply, one of those has no power. it makes a clicking sound, like it wants to turn on, then it turns off.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Sanyo DP50747 screen problems

              Replace or repair the Z-sustain / X-main board.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • jean luc ferre
                  laptop hp g72 b52sf screen problems
                  by jean luc ferre
                  Hello,
                  on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
                  the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
                  i verified the driver of the pΓ©ripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
                  i don't understand the reasons of the white stripe at the bottom of the screen below the task...
                  06-07-2025, 03:27 PM
                • Ryan.man
                  Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                  by Ryan.man
                  Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                  My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                  This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                  02-04-2025, 12:23 PM
                • Document Archive
                  Surface Mount Fuses Fundamentals Datasheet
                  by Document Archive
                  TE Circuit Protection offers the widest selection of surface-mount fuses available for addressing a broad range of overcurrent protection applications. Helping to prevent costly damage and promote a safe environment for electronic and electrical equipment, our single-use chip fuses provide performance stability to support applications with current ratings from .5A up to 20A.

                  TE Circuit Protection also offers the telecom FT600 fuse for telecommunications applications. This telecom fuse helps comply with North American overcurrent protection requirements, including Telcordia, GR-1089,...
                  10-07-2024, 06:07 AM
                • smic717394
                  iphone XS turns off when press on screen.
                  by smic717394
                  Hi,

                  I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                  07-25-2024, 10:16 AM
                • toddw65
                  Sanyo DP5834 - Gray Screen
                  by toddw65
                  Hey All,

                  I have a Sanyo DP5834 that did have an issue with the backlights, but I disassembled the unit and repaired the LED strips by resoldering all of the connectors. Now I've reassembled it and I have backlights and sound, but a grayish screen. I can tap on the screen and see that it's on, but no picture. All voltages seem to be correct on the power board.

                  Based on the LCD Flat panel TV troubleshooting guide by Bud Martin, I'm thinking the T-Con has failed because I'm getting 12v both into and out of FP1 on the T-Con. Am I on the right track?

                  Thanks,...
                  5 Photos
                  10-31-2024, 10:37 AM
                • Loading...
                • No more items.
                Working...