Substituting a Fuji F9223l for a F9222L

[nogger]

Hi all, i just realised i ordered a F9223L chip in place of a F9222L chip to repair a Samsung LCD TV PSU (BN96-03775A board). Looking t the Fuji info i have found (image attached) the only difference seems to be in the Rds (ON) value which is 0.1 ohm less. Assuming it's pin for pin then does anyone have any thoughts if this will cause me any problems or if it will be a safe substitute to use.

Thanks for looking

Graham

[PlainBill]

Re: Substituting a Fuji F9223l for a F9222L

I'd use it. I'd say it is an upgraded (or selected for better performance) version of the same controller.

PlainBill

[nogger]

Re: Substituting a Fuji F9223l for a F9222L

Thanks PlainBill, that was more or less my thinking.

If it blows up i will let you all know

Graham

[nogger]

Re: Substituting a Fuji F9223l for a F9222L

The parts arrived today , fitted & tested & all ok.

So if you cant get the F9222L try the F9223L instead.

Graham