RCA STB7766G1 Digital Converter Box

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gorr35
    Senior Member
    • Nov 2010
    • 127
    #1

    RCA STB7766G1 Digital Converter Box

    Iv'e been having this problem with my rca stb7766g1 digital converter box where a black bar shows up in the middle of the screen, changing channels and turning the box on and off doesn't make it go away....looked all over the net and can't find a similar situation. Maybe I didn't use the correct keywords.
    I know this section is usually for TV's but it does say "Troubleshooting TVs and VIDEO SOURCES". Any ideas?
    Attached Files
    Tags: None
    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA
      #2
      Re: RCA STB7766G1 Digital Converter Box

      Originally posted by gorr35
      Iv'e been having this problem with my rca stb7766g1 digital converter box where a black bar shows up in the middle of the screen, changing channels and turning the box on and off doesn't make it go away....looked all over the net and can't find a similar situation. Maybe I didn't use the correct keywords.
      I know this section is usually for TV's but it does say "Troubleshooting TVs and VIDEO SOURCES". Any ideas?
      Closed Captioning?

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

        Comment

        • gorr35
          Senior Member
          • Nov 2010
          • 127
          #3
          Re: RCA STB7766G1 Digital Converter Box

          If it's a closed captioning box then the tv nor the converter box are not set up for it...i checked the settings.

          EDIT: Plus there is no text inside the box....just blank.
          Last edited by gorr35; 09-06-2011, 01:24 PM.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Document Archive
              MPS NB670 NB670GQ Switch Mode Converter for Laptop Computers Datasheet
              by Document Archive
              The NB670 NB670GQ is a fully integrated high frequency synchronous rectified step-down switch mode converter with 3.3V fixed output voltage. It offers very compact solution to achieve 6A continuous output current and 9A peak output current over a wide input supply range with excellent load and line regulation. The NB670 operates at high efficiency over a wide output current load range. Constant-On-Time (COT) control mode provides fast transient response and eases loop stabilization.

              Under voltage lockout is internally set as 4.65V. An open drain power good signal indicates the output...
              10-23-2024, 03:23 AM
            • gizmo1990
              What is this PSW1 part on a circuit board? Trying to fix a Canopus ADVC-300 DV/VHS Converter
              by gizmo1990
              I'm trying to fix this Canopus converter so that I can convert lots of old VHS cassettes. The problem is that it turns on for a split (and I mean split!) second, the fan jerks and then.. nothing. I've checked the power brick works. I've opened up the converter itself and been testing for shorts.



              The image attached shows the on/off switch (which I've checked works) to the left of the yellow socket. Below the yellow socket is a green block marked 26 with a strange symbol at the front. Putting my probes either end of this block, on the silver parts, gives an open short...
              10-21-2024, 08:02 AM
            • wolf1976
              is there any univarsal wifi motherboard that supports and digital tvs ?
              by wolf1976
              hi i want to convert my simple digital tv because the motherboard is dead to wifi motherboard but with the ability has and tuner for digital channels DVB-T compatible in europe
              is there ?
              do you have to suggest me one ?
              thanks on advance...
              01-05-2025, 04:29 PM
            • wolf1976
              i look for equivalent dc to dc converter
              by wolf1976
              hi
              in an inverter of aircondition i have dc to dc converter mes1515mh
              i have attachment the pdf file
              can i take a dual converter with two dc outputs instead this ? because i cannot found the same or is not possible ?
              the problem is instead 15 volt dc output i have only 6,45 volt
              thanks on advancxe...
              08-01-2024, 04:52 PM
            • md500
              [Question] Ch341a and 5v to 3.3v with logic converter
              by md500
              zz0.8tpitu4y0i8zzI bought a ch341a (I'm waiting for it to arrive) and I noticed that the programmer has a bug that the data pins go to 5v when the VCC pin is at 3.3v (which is the voltage I'm looking for).

              Instead of doing the 3.3v mod, I'm thinking of converting the 5v to 3.3v with an 8 channel TXS0108E through the ZIF socket but I don't know if that would work, because it has to circulate voltage and also information.

              What I am looking for is something that will convert from 5v to 3.3v but without modifying the ch341a.

              I can't buy the ch341a 1.6v that has...
              05-24-2024, 06:51 PM
            • Loading...
            • No more items.
            Working...