samsung ln40b530p7fxza light up problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wyrmzr72
    New Member
    • Oct 2019
    • 8
    • USA

    #41
    Re: samsung ln40b530p7fxza light up problem

    Originally posted by nomoresonys
    Replace the 2 caps for starters, it may be your only problem.
    That pretty much confirms my thinking. The one thing that I hate with this one is that we had a bad electrical storm a few days before it quit.
    I'm hoping this doesn't mean I've got more damage here than the caps. I'm also from the "Old Days", where most of the bad caps I saw were on computer motherboards, and those never seemed to blow out the bottoms; they usually bulged and began to leak out the tops.
    Pics attached now. The caps I'm looking at are the yellow ones; the dust on the base looks like it's got something holding it in place. If the owner of the unit was a smoker, I'd associate that with the residue, but she is not.
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Last edited by wyrmzr72; 10-04-2019, 08:36 AM.

    Comment

    Related Topics

    Collapse

    • Document Archive
      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 05:50 AM
    • howardc64
      A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
      by howardc64
      Problem

      This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
      08-04-2024, 10:36 PM
    • howardc64
      Samsung UN55JU650DF network/streaming problem
      by howardc64
      Fixed a 9 year old UN55JU650 by replacing backlight. Original backlight LED was still working after 27k! hours but terrible picture of course. Few LEDs were out, 5-6 lens fell off (bright white spots) and another few popped off with slightest force. Surviving LEDs were all slightly blue so picture has a blue tint.

      This TV runs older Tizen OS (updated to latest version, see pic) and have problems with network (wifi or ethernet) connection. The Tizen UI frequently switch to coax input source while changing content sources. . If no good signal (coax not connected, no prior antenna/cable...
      07-09-2025, 12:44 PM
    • totof
      Samsung UE55JS9000 backlight issue
      by totof
      Hello.
      I'm sharing with those in the know a problem I'm having with my Samsung UE55JS9000T TV, which has a backlight fault with halos of light on the sides (see my photos). This is a model with LED strip backlighting on the sides.
      I took the TV apart to remove the panel and noticed that the "yellowish" film on the Plexiglas light diffusion plate was stuck to the LEDs. When I peeled it off, it left marks on the Plexiglas plate, which I cleaned as best I could with rubbing alcohol (see photo).
      The result isn't perfect, but it still seems pretty good to me.

      ...
      10-05-2025, 08:27 AM
    • valvashon
      Samsung UN60JU6500, stripe on left side of screen
      by valvashon
      Friend sent me this picture of what their 60" Samsung from 2015 is doing. I didn't have any luck getting rid of a vertical stripe in another TV that developed one so I'm not too excited about trying to fix this one. It's mine for the asking; wish it had a dead power supply or bad backlights instead.

      Is this most likely to be a connection at the circuit board or where the ribbon cable hits the screen itself?

      Update: was just informed that this stripe comes and goes and has been doing this for a couple of months.

      Thanks, Val



      ...
      11-21-2025, 03:01 PM
    • Loading...
    • No more items.
    Working...