smd capacitor id needed..
hi! i have just removed a high esr, smd electrolytic capacitor from a lcd tv mainboard with the following numbers on it..14109/10/50f can anyone tell me the value of this,have searched the web for hours,still no joy,thanks guy's
-
there a risk of this aluminum electrolytic capacitor of electronic device long term storage opening and leaking acid and corroding the PCB board?
... -
Hello
I've got an Asus laptop which received with no power, so I found that one capacitor been damaged. I don't have schematics for that board which is DANJMMB11A0 REV:A
Without that caps laptop is turning on fine so problem more likely is sorted but I would like to put back the correct one as it should be.
If any way could help with sorting out specification somehow, I just know that my meter shows 11,2uF but is it 50V or 10V ?? or any others.
See attached photo off the capacitor, maybe someone have same motherboard and can check it for me please.
... -
Guys. could you help me please to decode some codes of main capacitor's producers.
I would like to know the manufacturing date.
Based on the information from capacitors I have - it seems easy to decode manufacturing date for Rubycon, Nichicon.
If I understood correctly:
1. Nichicons marks date of production as (see the attached pictures) H2116
I don't understand the meaning of first letter - may be it is code of factory.
21 -year
16 week
I bought this capacitor recently.
another one-
2.... -
Hi people, I hope this is the correct spot to post this, I'm new to the forum.
I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.
I hope these photos make it clear which component I am referring to:
(yes, the soldering is a bit botched from removing the blown one, I know)
I have found the board schematic (attached), but there does not seem to be a boardview available. I have never... -
Hi all,
I have a faulty monitor, the surface mount electrolytic capacitor 33uF 100V needs to be replaced, now I can't seem to source them locally
, so my question is can I replace it with a through-hole electrolytic capacitor of the same value? Or has someone got a better suggestion?
Cheerio...