Conponent replacement hisense tv

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • HelpMeRepair
    Senior Member
    • Jun 2022
    • 62
    • Canada
    #1

    Conponent replacement hisense tv

    Hi guys someone gave mr a tv that turn on then led panel stay on and the roku software doesnt display anything

    While inspecting th board i foud this part clumsy

    Can someone help me identify or give me a equivalent so I can replace it ? Thabks in advance
    Attached Files
    Tags: None
    • alfatv
      Badcaps Veteran
      • Sep 2020
      • 353
      • Canada
      #2
      Re: Conponent replacement hisense tv

      Google search points to PMST3904, thats NPN transistor.
      You can check it multimeter.
      There is the same type next to it, you can check it too to confirm it's NPN.

        Comment

        • HelpMeRepair
          Senior Member
          • Jun 2022
          • 62
          • Canada
          #3
          Re: Conponent replacement hisense tv

          Originally posted by alfatv
          Google search points to PMST3904, thats NPN transistor.
          You can check it multimeter.
          There is the same type next to it, you can check it too to confirm it's NPN.


          Thanks alot

            Comment

            • ducky29
              Badcaps Veteran
              • Dec 2015
              • 369
              • Europe
              #4
              Re: Conponent replacement hisense tv

              Edit: Wrong reply

                Comment

                Previous template Next

                Related Topics

                Collapse
                • reformatt
                  Macbook Air M2 A2681 Kernel panics after screen replacement
                  by reformatt
                  Just had a customer bring in a M2 MBA A2681 that had had a screen replacement in April at another repairer. Since then, she has been getting intermittent kernel panics. It's an aftermarket screen, and of course it fails in diagnostics as the calibration hasn't been done. The error in the panic log is "No device added after powering on the rails".

                  It seems the original repairer has swapped the board and the screen to other MAC's, and said that it isn't a screen issue. From what I understand, by doing a quick search on Google, this is in fact a screen issue. The panic relates...
                  07-31-2025, 08:37 PM
                • the_rem
                  Unknown transformer : how to find a good replacement part ?
                  by the_rem
                  Hello guys,

                  I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

                  I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
                  VEF20FB07BW(2025001A)20110927.pdf
                  https://drive.google.com
                  04-23-2025, 01:48 AM
                • ezenia
                  PS4 controller left stick potentiometer replacement issue
                  by ezenia
                  Hello,

                  Not sure if this is the correct section, but I have a PS4 controller that I am trying to fix. It developed stick drift on the left stick and the usual simpler methods did not fix the problem.

                  So I went on eBay and ordered some replacement potentiometers. https://www.ebay.co.uk/itm/174967976757 is where I got them from.

                  I took the green potentiometers off the replacement sticks and soldered them onto the PCB. Assembled the controller and ran some tests. The drifting was somewhat fixed (not fully in center, but way better than before). However,...
                  09-30-2023, 02:19 PM
                • nono34
                  Hisense stuck in Colors cycle like test pattern.
                  by nono34
                  Hello,

                  I accidentally changed the project ID in the service menu of my Vidaa Hisense 100U7KQ TV. When I turn on the TV, the screen displays an RGB color cycle (test mode???). I contacted Hisense, and they sent me a usb_MTK_9618.EU.bin file, but it doesn't work. I can see that the USB drive is being read, and it flashes for about 10 minutes (the screen remains in the color cycle during the firmware reading), then the TV turns off and restarts, but still in the color cycle mode.

                  I want to mention that the 4GB USB is formatted in FAT32 MBR. I've also renamed the file to...
                  10-24-2024, 04:31 PM
                • boosti45
                  Macbook pro logic board replacement parts quesion
                  by boosti45
                  i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180​" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?...
                  08-21-2024, 05:23 AM
                • Loading...
                • No more items.
                Working...