Hisense Power Supply RSAG7.820.6279 Schematic

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kramer826
    New Member
    • May 2017
    • 4
    • australia
    #1

    Hisense Power Supply RSAG7.820.6279 Schematic

    Hello,I am looking for a schematic for Hisense Power Supply RSAG7.820.6279
    it is from TV 75M7000UWD or a service manual for this TV if it is available.
    Thankyou for any assistance.
    Tags: None
    • williej
      Member
      • May 2005
      • 10
      • USA
      #2
      Re: Hisense Power Supply RSAG7.820.6279 Schematic

      This is it.
      Attached Files

        Comment

        • kramer826
          New Member
          • May 2017
          • 4
          • australia
          #3
          Re: Hisense Power Supply RSAG7.820.6279 Schematic

          thankyou very much
          very helpful
          kind regards

            Comment

            • AGESOPORTE
              New Member
              • Sep 2024
              • 1
              • México
              #4
              Hello, Good day, I am looking for a schematic for Hisense Power Supply RSAG7.820.9829
              it is from TV 50H6G or a service manual for this TV if it is available.
              Thank you for any assistance & Best Regards.​

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12206
                  • U.S.
                  #5
                  So what are your symptoms?
                  Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      ORIGINAL POWER SUPPLY BOARD
                      7 Photos
                      11-22-2024, 01:46 PM
                    • sam_sam_sam
                      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                      by sam_sam_sam
                      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                      03-31-2024, 02:12 PM
                    • sam_sam_sam
                      Modification to a ZD-987 desoldering/soldering station using a external switching power supply
                      by sam_sam_sam
                      I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

                      I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
                      07-01-2024, 06:34 AM
                    • JimBanville
                      Definitive technology SC 2000 subwoofer amp's power supply clicking and popping
                      by JimBanville
                      The sub developed a constant popping every couple seconds from woofer and power LED flickering with nothing but wall AC connected. Connecting an audio cable didn't change anything. It doesn't play but a second or two of audio in between the pops.
                      Opened it up and discovered the power supply is making a faint clicking or ticking sound.
                      I measured the amp's output to the woofer and it pulses up to 50mv DC to be driver. The pulses coincide with the power supply ticking/clicking.
                      I measured the power supply output going to the amp board and it too has this pulsing. Voltage cycles...
                      09-13-2023, 07:21 AM
                    • Russ1
                      Starlink GEN2 Router Internal Power Supply Chicony UTP-211C Schematic
                      by Russ1
                      Sick of seeing big numbers of these routers dead no power light underneath.....
                      Chasing Schematic of this power supply I have searched high and low....
                      Already spotted a few swollen caps, but Ac fuse ok.....
                      This is a dual output 50Vdc 2.5A and 12Vdc 1.25A psu

                      Can anyone help with any type of schematic and parts list ?

                      Thanks and Regards, Russ
                      1 Photo
                      07-10-2025, 11:01 PM
                    • Loading...
                    • No more items.
                    Working...