Samsung 58M6120kxzl versión:DA01

[Telemundo]

Hello, could you me with file please, thanks
Model:KANT_M_BUILL_IN
CODE:BN-02568B
MODEL:BN41-02558
DATE:2017
BN97-13471F
BN94-12695T
IC1604 25Q40CL

[lotas]

Re: Samsung 58M6120kxzl versiónA01

Hello, could you me with file please, thanks
Model:KANT_M_BUILL_IN
CODE:BN-02568B
MODEL:BN41-02558
DATE:2017
BN97-13471F
BN94-12695T
IC1604 25Q40CL

You need to post your non-working dump, I will fix it, other dumps will not work for you.

[Telemundo]

Re: Samsung 58M6120kxzl versiónA01

you need to post your non-working dump, i will fix it, other dumps will not work for you.

[lotas]

Re: Samsung 58M6120kxzl versiónA01

Your firmware is working.

[Telemundo]

Re: Samsung 58M6120kxzl versiónA01

The tv restarts, I know remove the main connector and the LEDs turn on well I know the display disconnects and it remains the same how can I activate the main without the TV source I know place the point fb_trdy_3 to pin 1 of the CN1300 connector, I appreciate your help.

[lotas]

Re: Samsung 58M6120kxzl versiónA01

fb_trdy_1 - fb_trdy_3

[Telemundo]

Re: Samsung un58M6120kxzl versiónA01

Yes, I know he did that but it still doesn't work, it keeps restarting, the following is how I test the main without the source, what to do, I know, put the 12 vol to the main and what other point must be polarized in the main

[lotas]

Re: Samsung 58M6120kxzl versiónA01

It is not clear, you are rebooting if one left cable, one right cable, both cables (left and right) are disconnected.

[Telemundo]

Re: Samsung 58M6120kxzl versiónA01

Yes, I know he did that but it still doesn't work, it keeps restarting, the following is how I test the main without the source, what to do, I know, put the 12 vol to the main and what other point must be polarized in the main

[Telemundo]

Re: Samsung 58M6120kxzl versiónA01

The TV restarts with all the cables placed, those of the source and the main TV was on and it turned off and it stayed in that mode restarting

[Telemundo]

Re: Samsung 58M6120kxzl versiónA01

Thank you very much for your collaboration, the problem has been solved, the 12 volt fuse on the motherboard was open f23_UT