Ahb8016t-3521dv100 v2.02b

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ugura09
    Senior Member
    • Jun 2016
    • 93
    • aydın
    #1

    Ahb8016t-3521dv100 v2.02b

    Eeprom: FM24C08D
    MB: AHB8016T-3521DV100_V2.02B
    CPU: Hi3521_DRBCV100_CPBQL2031_2032-CN_03

    İşlemci Yanık Cihazdan Kopyadır Şifre Var Yada Yok Bilinmiyor
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Aldanırsın Yıllara
    Tags: None
    • kayali
      New Member
      • Jul 2023
      • 1
      • Turkey
      #2
      Re: Ahb8016t-3521dv100 v2.02b

      thanks

        Comment

        • arif3203
          Senior Member
          • Feb 2021
          • 58
          • Banyumas
          #3
          Please share this firmwire Ahb8016t-3521dv100 v2.02b

            Comment

            Previous template Next

            Related Topics

            Collapse
            • SidneyCanadas
              93C46 and 93C56 EEPROM
              by SidneyCanadas
              I tore apart my instrument cluster for my 2008 Toyota Corolla made in 2007 in Cambridge, Ontario, Canada and pcb location: IC6=EEPROM is a surface mounted device with part # of 93C46W7, some claim the EEPROM out of a Camry part # 93C56 will allow odometer to roll over 299 999 KM or miles. The data sheet for both is below:

              https://cdn.badcaps-static.com/pdfs/...c6e42b20d3.pdf 2

              Anyone know if the Camry one will work on my Corolla?. And which EEPROM reader/writers do you all recommend I purchase that will allow me to read the old values of the old...
              06-14-2023, 01:16 PM
            • dmccul2698
              Pioneer DEX-P99rs "No EEProm " diagnostic code.
              by dmccul2698
              Hello, My head unit developed strange behaviors so I ran the built-in diagnostic package which returned "No EEProm". The service manual says there is no EEProm connected. I approached Pioneer and they said to swap out the DSP board. All said and good but the DSP board is $860 USD. I am hoping someone can help me

              1). Understand the schematic and check the connections between the EEProm and DSP
              2). Check the functionality of the EEProm

              I don't know if this is the unit's problem but it's a place to start.

              I have little to no electronic experience...
              6 Photos
              04-08-2024, 05:32 PM
            • acedogblast
              Guide to transplant MEC1503 EC chip and EEPROM reprogamming for T14s gen 2 and X13 gen 2
              by acedogblast
              This is a guide that I am writing for helping others to replace their MEC1503 EC chip if it breaks (or to get around an inconvenient prompt to the BIOS). This forum has been extremely helpful to me so I would like to contribute to help others. I will tell you right now that this task is very difficult to do. You MUST have experience and tools to do precision micro-soldering, BGA reballing, trace repair, and general laptop repair skills.

              There are some specialty tools needed to do this task. The replacement MEC1503 chips can be acquired from Aliexpress. Do not buy the bare chips as...
              11-02-2024, 05:13 PM
            • jordi90
              Lenovo Thinkpad 20LT-S0KL1G bricked after writing the wrong eeprom
              by jordi90
              Hi,
              I was given a laptop with a BIOS locked by a password. I read that one way to unlock it is to read the EEPROM contents, patch them, and write them back. I was using the typical CH341A programmer and clip to do this, but because the clip is so loose, after patching the dump I accidentally placed the clip on the wrong EEPROM and now the laptop won’t boot.

              Can I do something to fix it? I’ve attached photos.

              ...
              10-09-2025, 01:08 PM
            • 247it
              ThinkPad E15 G4 PD Controller TPS65994AE EEPROM
              by 247it
              Hi, I have a ThinkPad E15 G4 I am working on for fun, the PD chip is not talking to the charger, it's stuck at 5v, I have replaced the PD chip three times now (new chips) and always the same result, I have checked for shorts, correct voltages on the PD IC etc - 5v 3v, and the 1.6v on the cc lines, even replaced the USB C port protector IC and the charging port,

              The PD IC has a EEPROM connected directly, it's the one in the image attached, I assume the PD chip will not start without some initial commands stored in the EEPROM, the PD IC never shows in device manager, i backed up the              ...
              03-23-2025, 03:53 AM
            • Loading...
            • No more items.
            Working...