default password to Epson EMP-X5e

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • vgbaik56
    New Member
    • Oct 2017
    • 1
    • Russia
    #1

    default password to Epson EMP-X5e

    I today restored the default password to
    Epson EMP-X5e. The board has 2 contacts with the inscription PW_RST. We need to connect them. Then turn on the projector and try to enter the default password. I have it 1793. Then turn off the projector and disconnect these contacts. Everything should work.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • Nopslide
      HP Omen 15-dh0052nf power-on & bios password
      by Nopslide
      Hello everyone, I come here to tell you my problem regarding the power-on password. It is not a bios reset demand, and i can't have any access to windows. This is the bios and power-on password that is blocking all other things.

      My Omen 15-dh0052nf purchased second-hand was configured with the bios password upon purchase (very simple password :P ).

      Having decided to sell it in order to get something more powerful, I reset all BIOS settings and set a blank administrator password. But the power-on password cannot be changed to a blank one so I let the actual password set....
      04-01-2024, 04:27 PM
    • narf
      Epson EB-U42 projector / Caps with 0.7 ohms ?!
      by narf
      hi all,

      first of all: i'm a (motivated) newbie, so please forgive me any stupid question i may or may not ask

      i'm currently repairing a projector: Epson EB-U42 that doesn't start (no lights, nothing).

      what i've found so far:
      - the PSU does its job and supplies 12V to the mainboard via the connector.
      - shortly thereafter, there is a mosfet (TS420-600B) where i can test 12V on the one side (in the data sheet this side is called Anode), Gate 0V, Kathode shorted to ground
      - not far away, there's the first cap with a resistance of 0.7 ohms....
      07-02-2024, 03:53 PM
    • outsider
      Panasonic FZ-G1 MK5 - BIOS password returning
      by outsider
      Hello
      I removed the BIOS password thanks to the help of one of the friends of this forum.
      https://www.badcaps.net/forum/troubl...61#post3637661

      The batch from which the password was removed works correctly but... after some time, the BIOS password is set again, I reprogrammed the batch with the removed password, it's ok, there is no password, I set my password, ok, I can enter the BIOS with my password but...
      06-17-2025, 12:51 AM
    • platinumsteel
      Epson VS250 Projector Lamp Not Working.
      by platinumsteel
      Hi guys gooday i have a Epson VS250 Projector that turns on and is also being recognized and detected by the computer when i plug the hdmi cable.The only issue the projector lamp is not working .Are these lamps repairable ? Or i should just forget repairing the lamp and just buy a replacement. Thanks...
      04-09-2023, 04:03 PM
    • EVAN STUARTS
      Epson eb-e 01 projector
      by EVAN STUARTS
      Hallo guys I need some help with this Epson projector I turn it on but it stops at power light it does not switch on
      Pliz help guyz
      04-25-2023, 09:46 AM
    • Loading...
    • No more items.
    Working...