Looking for dump of EPSON L110 printer please
-
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
Hi all,
a friend gave me this printer because it's no longer working.
It powers on, but won't do a self-test print and when connected via USB to Windows, Device Manager says No Printer Attached under USB Hubs tree.
The red light doesn't blink either with no paper inside.
I think the firmware maybe corrupted. If someone has a similar printer and can provide a firmware dump, I really appreciate it.
Printer model: Panda PRJ-58U
Flash memory: Boyamicro BY25D16ASSIG -
-
hello everyone.
I need binary for Epson L3150, this printer is something special today. It happens that when you connect USB to the PC, it does not recognize drivers nor does the software even find it to load the emergency firmware again. The device only turns on and the power button LED remains constantly on. The head normally comes to its ready position but does not react to buttons or scan. I point out that I have also tried installing a new head, scanner or new button panel... but it is still in a vegetative state. Has this ever happened to anyone?... -
Hello guys,
Does somebody has this dump for printer canon G3430
Thank you in advance
Comment