I have 2 of these. This one had no Standby Power when measured. For a cheap PSU this has a great many components on the PCB. Many tiny resistors etc. in the secondary.
I found one domed cap in the secondary and the PS-ON green wire looks to be damaged by arcing where it enters the PCB.
The third picture shows the arcing on the green PS-ON wire, and the second last shows the doming on the capacitor between the two toroids.
Comments and Suggestions welcome.
I found one domed cap in the secondary and the PS-ON green wire looks to be damaged by arcing where it enters the PCB.
The third picture shows the arcing on the green PS-ON wire, and the second last shows the doming on the capacitor between the two toroids.
Comments and Suggestions welcome.
Comment