Re: the gutless, bloated, and fried power supply hall of shame
It is the same PCB model, although I noticed that in the core of the transformer that carries the 3GO puts ERL35 (although I doubt it is true, it is too small to be an ERL35, I think it is rather 28 same as the L-LINK ), and has a small PFC winding and an X2 capacitor (in the area where RX1 is written in the L-LINK PSU), but the rest is the same, even the model is the same (zf-2012b) except the REV which is VER2.0 the L-LINK and the 3GO VER2.1.
And I realized that it has tin balls stuck in some components.
Then I will put more detailed photos inside the PSU.
You may be able to deliver 150w, but surely take a terrible ripple on the voltage lines.
Originally posted by PeteS in CA
View Post
And I realized that it has tin balls stuck in some components.
Then I will put more detailed photos inside the PSU.
You may be able to deliver 150w, but surely take a terrible ripple on the voltage lines.
Comment