I recently came across an APC RS 800 UPS. It's completely dead the surge outlets work (they are always on).
However other than that there are no signs of life. There are no batteries connected but from what I've heard it should power up connect the backup outlets to AC and illuminate both the online and replace battery light in that case.
Any idea what would cause a UPS to go completely belly up like this?
No toasty components on the board either. All 3 fuses check out good too.
However other than that there are no signs of life. There are no batteries connected but from what I've heard it should power up connect the backup outlets to AC and illuminate both the online and replace battery light in that case.
Any idea what would cause a UPS to go completely belly up like this?
No toasty components on the board either. All 3 fuses check out good too.
Comment