Help choosing replacement transformer for Levoit 600S SMPS

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • learnmore
    Senior Member
    • Mar 2022
    • 107
    • England
    #1

    Help choosing replacement transformer for Levoit 600S SMPS

    Hello Community,

    I'm attempting to repair the SMPS on a Levoit 600S air purifier. The transformer is likely open. It has six pins. 2 pairs on the primary side (one pair tested open) and 1pair of legs on the secondary side. Legs on the secondary side are spread wide apart (end-to-end). I've circled them in blue. Dimentons of the transformer are 22x23mm. Marking on the transformer are EE16 1.9mH-B. Fuse for the powerboard is fuse 250V 3.15A. I've been unable to find an exact match and I'm hoping for some help here to find a suitable replacment.

    Peace
    LM
    Attached Files

    if you find these attachements useful please consider making a small donation to the site

    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • unimatrix93
      Replacement transformer for Samsung fridge
      by unimatrix93
      Dear forum

      My Samsung fridge died from a fault on the mainline and the transformer (https://www.hqelektronika.hu/hu/halo...-w8-da2600009k) died.
      No voltage on the secondary, measuring resistance shows open circuit. I concluded a blown fuse which is deep inside the transformer, I don't think I can disassemble it to replace the fuse.

      The second problem is that I cannot find an original replacement part anywhere or even If I do it's pretty expensive.

      My question is: Can I replace this transformer with a generic 230V to 17V one? The output has 4...
      07-14-2025, 02:16 AM
    • the_rem
      Unknown transformer : how to find a good replacement part ?
      by the_rem
      Hello guys,

      I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

      I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
      VEF20FB07BW(2025001A)20110927.pdf
      https://drive.google.com
      04-23-2025, 01:48 AM
    • rewease
      Replacement for the Siemens Bakelite caps in an early 1980s SMPS
      by rewease
      Hi everyone,

      There actually was a time when early SMPS and late bakelite housed electrolytic caps coexisted in high end industrial gear. A friend of mine just got himself a CNC milling machine form that time with its first set of now 41 year old caps still installed in the PSU... and it's malfunctioning.

      Two of the caps have already leaked slightly onto the board. I have not desoldered or measured any so far but they should qualify for replacement.

      Now I'm wondering what to put in there as a replacement. First idea was state of the art low-ESR Nippon KY,...
      09-17-2023, 12:53 AM
    • double_DD
      Transformer replacement for a dead coffee machine
      by double_DD
      Hi guys,

      I have a dead coffee machine, and it seems that the culprit (no 1, at least) is a dead trafo - primary coil seems to be blown open (type shown on the picture below).

      Now, I'm unable to find direct replacement anywhere on ebay or aliexpress, and all similar that I' was able to find are rated too low (<1A).

      If someone knows a shop to buy replacement (EU/CH), that would of course be my 1st option.
      My other ideas:
      - to buy 220/20Vac trafo with 30VA, and to "manually" create secondary 12V output just via resistor
      - to buy...
      06-23-2025, 05:43 AM
    • Document Archive
      ACER Predator PO5-600S Predator Orion 5000 i7-9700 Specification for Upgrade or Repair
      by Document Archive
      This specification for the ACER Predator PO5-600S can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Predator PO5-600S boardview and Predator PO5-600S schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-12-2024, 03:28 PM
    • Loading...
    • No more items.
    Working...