Artlii Projector Enjoy2 1080P Mini Smart Projector Power Supply Repair

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • garrymc123
    Badcaps Veteran
    • Apr 2010
    • 336
    • United Kingdom
    #1

    Artlii Projector Enjoy2 1080P Mini Smart Projector Power Supply Repair

    Hi There got one of these projectors with no power after stripping down the power supply the main fuse on the board has blown and the n-channel MOSFET is shorted so need to replace the small 6-pin ic but not sure about the ic number 63 523 also the values of the resisters that are blown r24 r28 r29 r30 and also if there is a compatible to the MOSFET KEF5N65

    Thanks for any info
    2 Photos
    Your never to old to learn
    Tags: None
    • harp
      Badcaps Veteran
      • Jun 2022
      • 598
      • Planet Earth
      #2
      R24 is 0 ohm
      Other R28,29,30 are same 1R2 (1.2 ohm)
      IC is OB2263MP

      For mosfet not sure...
      Attached Files

        Comment

        • CapLeaker
          Leaking Member
          • Dec 2014
          • 8133
          • Canada
          #3
          For the MOSFET match something up for “5N65”.
          https://www.digikey.ca/en/products/d...N65APBF/812289

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • sam_sam_sam
              Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
              by sam_sam_sam
              I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

              One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
              03-31-2024, 02:12 PM
            • Jembang
              coocaa 50S5G smart tv dropped voltage when connecting power supply to mainboard
              by Jembang
              good day hoping someone can lend a hand, im repairing smart tv 50 inch, status when turning on back light is dim but you can see the tv logo then slowly fading out to black, i check the supply to tcon, i only read 5+v, must be 12v, i removed lvds cable and check voltage to mainboard turned on its also 5v, then i remove the cable mainboard to power supply, i read 12v in power supply, thinking that the problem is in the mainboard, coz theres 12v in power supply, i also check while turning on checking volts in main board 12v dropping to 5v, im just new repairing in TV, hope someone see my post t...
              11-01-2024, 09:55 AM
            • Document Archive
              HP ProDesk ProDesk 400 G2 Desktop Mini PC (ENERGY STAR) ProDesk 400 i5-6500T Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP ProDesk ProDesk 400 G2 Desktop Mini PC (ENERGY STAR) can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk ProDesk 400 G2 Desktop Mini PC (ENERGY STAR) boardview and ProDesk ProDesk 400 G2 Desktop Mini PC (ENERGY STAR) schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant...
              09-12-2024, 03:44 PM
            • Document Archive
              HP EliteDesk EliteDesk 800 35W G2 Desktop Mini PC EliteDesk 800 i7-6700T Specification for Upgrade or Repair
              by Document Archive
              This specification for the HP EliteDesk EliteDesk 800 35W G2 Desktop Mini PC can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk EliteDesk 800 35W G2 Desktop Mini PC boardview and EliteDesk EliteDesk 800 35W G2 Desktop Mini PC schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum....
              09-12-2024, 03:36 PM
            • Loading...
            • No more items.
            Working...