Announcement

Collapse
No announcement yet.

HP C6180 All in one printer - Power Cycling loop

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HP C6180 All in one printer - Power Cycling loop

    This is a printer from a friend of mine. It was one of those deals where you say, " yeah, what the hell, I'll take a look at it" not really expecting to find anything.

    The problem - it was that it was cycling power all the time. Stuck in a loop.

    So far I found one 330uF 10V TEAPO cap swollen. I will pull the rest and check them and post the result plus pictures when I am done.
    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

    Tags: None
    #2
    Re: HP C6180 All in one printer - Power Cycling loop

    The problem was that the screen would come up to the first picture, run a little, then blank out and start over again, and again, and again.

    Well, that one bad cap was all it was. As you can see in the pics, it's working again. Suprisingly, this was not too bad to get to and replace.
    Attached Files
    The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

    Comment

      #3
      Re: HP C6180 All in one printer - Power Cycling loop

      Nice work, was it the only Teapo in this printer ?

      Comment

        #4
        Re: HP C6180 All in one printer - Power Cycling loop

        No, there was another. I didnt check or change it cause I only had one good 330uF 16V cap.
        The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

        Comment

        Previous template Next
        Working...
        X