This psu was returned to me after I cleaned it. The owner said that his pc shuts down after a few seconds. Now I have to fix it since "I broke it probably"
It turns on but soon after the 5v rail starts dropping to 4 something volts without load. All the other voltages are rock solid and within spec. With load 5V even gets lower like 3.6V and the psu turns off. I doubt only a recap would help on this one. The modular cable soldering is a mess, but there are no short or anything on the pcb. Has anyone experienced this issue with this psu. It's a cwt psh model.

Comment