Ultra ULT-LS6000P 600W ATX

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • everell
    Badcaps Legend
    • Jan 2009
    • 1514
    • USA

    #21
    Re: Ultra ULT-LS6000P 600W ATX

    The resistors are probably in the 5vsb circuit. The value of one is 1.5 ohms and the value of the other is .5 ohms. I worked on a Ultra.....different model.....but probably very similar 5vsb circuit. Here is a picture of the .5 ohm resistor from my power supply and a schematic of the circuit. The two resistors are R109 and R110.
    Attached Files
    Old proverb say.........If you shoot at nothing, you will hit nothing (George Henry 10-14-11)

    Comment

    • 999999999
      Badcaps Veteran
      • Sep 2006
      • 774
      • USA

      #22
      Re: Ultra ULT-LS6000P 600W ATX

      Originally posted by bsweasel
      This thing is driving me crazy.... I'm starting to question if its worth fixing. So these resistors are around the switching transistors on primary side. Hoping someone can confirm my color translations:
      Brown:green:black:gold:brown
      Black:green:black:silver:brown
      Hard to tell, they have both been heated, so the colors look dull to me....or maybe I'm getting color blind. Really wish I had a schematic of this pile.
      You didn't enter location information in your forum profile so we don't know where you are, to the extent of knowing how much trouble it is to get components or what a replacement PSU would cost in your area, but...

      I'd say this PSU isn't worth repairing since you mentioned the fan failed and that caused the whole thing to bake. For it to pop the high side capacitors, it's bound to have put a lot of stress on the low side output caps and 5VSB cap(s) so you could end up spending as much as the PSU would be worth working, not including the value of your time... and as others suggested, it's not really a 600W PSU. Just looking at what seems to be a 6A bridge rectifier, if it's 70% efficient with 110VAC input, ~ 462W limit right there.

      Comment

      • bsweasel
        Senior Member
        • Jun 2010
        • 82
        • USA

        #23
        Re: Ultra ULT-LS6000P 600W ATX

        Ok, looking for some more guidance. What is this and how do I test it? And does it have polarity? I pulled it out a couple weeks ago thinking I had a picture of how it went, and I don't....nor do I know if its any good. I put it on my ohm meter and it reads open.... it appears to be part of this same circuit that is shot with all these bad parts.

        Yeah, and I know this thing is really not worth it money wise, but I'm considering it an education and educations aren't cheap!!
        Attached Files

        Comment

        Related Topics

        Collapse

        • Document Archive
          LG Gram Ultra-Lightweight Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the LG Gram Ultra-Lightweight Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Ultra-Lightweight boardview and Ultra-Lightweight schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-07-2024, 03:40 AM
        • Document Archive
          LG Gram Ultra-Lightweight Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the LG Gram Ultra-Lightweight Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Ultra-Lightweight boardview and Ultra-Lightweight schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-07-2024, 03:40 AM
        • jinu_j
          Dell 2209WA - power supply - Fusible Resistor replacement
          by jinu_j
          Hi

          I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.

          1. FR950 - blown fusible resistor - 0.2 Ohm 1W
          2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
          3. R835 - Blown Resistor - 20KOhm SMD resistor
          4. D930 - Shorted Schottkey Diode...
          05-03-2025, 10:51 PM
        • mikey5791
          Need help to replace burned resistor in 350w atx psu
          by mikey5791
          Hi to all forum members,

          Got this faulty 350 watt atx psu dirt cheap from a local online seller as i am keen to use it as a learning tool to repair faulty power supply.
          The faulty part is quite obvious from the burn area near the 16pin KA7500 BD pwm. The fuse is still intact with good continuity.

          Upon power on ac, there is 5vdc standby power on cathode of diode D14 and about 10vdc on cathode of diode D13.(This should be the aux power to generate the 12v and 5v rail.)
          Initially i replace the two burned resistors near my marked red arrow to 200 ohm resistor...
          12-26-2024, 04:55 AM
        • Document Archive
          LG Gram Ultra-Lightweight Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the LG Gram Ultra-Lightweight Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Ultra-Lightweight boardview and Ultra-Lightweight schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
          09-07-2024, 03:40 AM
        • Loading...
        • No more items.
        Working...