Announcement

Collapse
No announcement yet.

LifeBook P771-D FMVNP5NE CP502430-Z5 Schematic/Boardview Request

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    LifeBook P771-D FMVNP5NE CP502430-Z5 Schematic/Boardview Request

    The fujitsu laptop is shorted and i suspect a mosfet, because its heating up when injected in DC bench
    Attached Files

    #2
    Re: LifeBook P771-D FMVNP5NE CP502430-Z5 Schematic/Boardview Request

    Which part is heating up ? The mosfet ? What are the markings on the mosfet ?

    Remove all power. Meter in resistance mode (2k scale is ok).

    Check the resistance for the following:

    source (1-2-3) & drain (5-6-7-8)
    source (1-2-3) & gate (4)
    gate (4) & drain (5-6-7-8)

    Checking for any low resistance readings. Post your measurements.

    Comment


      #3
      Re: LifeBook P771-D FMVNP5NE CP502430-Z5 Schematic/Boardview Request

      Originally posted by mon2 View Post
      Which part is heating up ? The mosfet ? What are the markings on the mosfet ?

      Remove all power. Meter in resistance mode (2k scale is ok).

      Check the resistance for the following:

      source (1-2-3) & drain (5-6-7-8)
      source (1-2-3) & gate (4)
      gate (4) & drain (5-6-7-8)

      Checking for any low resistance readings. Post your measurements.



      The marking of the mosfet is UE 1224G, i cant find any details about it

      For the measurements

      source (1-2-3) & drain (5-6-7-8): 1.0m Ω

      source (1-2-3) & gate (4): 099.4k Ω

      gate (4) & drain (5-6-7-8): 1.1m Ω

      i only injected 3volts and 1amp skipping the fuse and that mosfet heats up

      Comment


        #4
        Re: LifeBook P771-D FMVNP5NE CP502430-Z5 Schematic/Boardview Request

        Originally posted by Adiktus View Post
        The marking of the mosfet is UE 1224G, i cant find any details about it

        For the measurements

        source (1-2-3) & drain (5-6-7-8): 1.0m Ω

        source (1-2-3) & gate (4): 099.4k Ω

        gate (4) & drain (5-6-7-8): 1.1m Ω

        i only injected 3volts and 1amp skipping the fuse and that mosfet heats up
        change mosfet low resistance says itself.

        Comment

        Working...
        X