Hello, i would appriciate if you could help me find schematics and boardview for the Tongfang GI5CN series motherboard,
GI5CNXA v1.1 to be more precise. Best regards...
GI5CNXA v1.1 to be more precise. Best regards...
-
I need help with a bios for the above machine - Ryzen 7 14". I get fan spin, keyboard lights up and sometimes the screen works but is usually a black screen.
PC Specialist - P/N PC1-1847447
S/N 1847447001
Board number: MBPPF4NU18-FN10... -
GI5CNXA MB v1.0 monster Abra A5 V13.3 SR40B HM370
Good luck to everyone, my problem is as follows. I have a la-f841p rev 1a motherboard, which occasionally gives a blue screen due to the processor running the motherboard. I installed the southern chipset of this motherboard into the short-circuited device with Monster Abra A5 v13.3 GI5CNXA MB v1.0. When I trigger the monster device, it goes up to 230mah and turns it off again. I have tried many of these devices before, but I did not get any results. They definitely want a brand new chipset. Other models do not have this problem,... -
Hello, would anyone have the schematics and/or board view for the Tongfang GM5TG0O (aka XMG Core 15 M21, Avell A70 MOB, Mechrevo Z3 Pro, among others) or a similar model?
I'm trying to debug an issue with the webcam module. Actual camera module and eDP cable both replaced already, but issue persists (glitched image, faint LED indicator, perhaps a power issue?). Having the schematics and/or board view would help a lot... -
Hello, does anyone have the wiring diagram for the Tongfang GX4HRXL?
Thanks in advance!
Best regards​
cyb3rj05-09-2025, 05:20 AM -
I have 50 surface pro 7's. This is for my company that I am in charge of fixing. So many units are not working, meaning the touch isn't with new screen. I get the error precise touch device error 10 in device manager. I flash bios, tried updated drivers but to no avail...Is this a bios issue?
Comment