HP 17-ca1035ca Schematic needed

jkyoho

Member

Join Date: Oct 2020

Posts: 17

Country: Canada
#1

HP 17-ca1035ca Schematic needed

07-30-2021, 12:55 PM

board print id: DUMBLE20-6050A3056601-MB-A02
I got this water damage HP BOARD and need help find the missing cap and Orange pad corroded dont know where it should go

Any similar schematic and boardview can be use?
Attached Files
Tags: None
mferna14

Badcaps Legend

Join Date: Jun 2018

Posts: 1015

Country: Canada
#2

10-06-2021, 03:25 PM

Re: HP 17-ca1035ca Schematic needed

It's the 19V rail, Just take a wire & solder it to any close by 19v trackpad. Don't worry about the caps right now. You can easily match this size caps on any hp schematics, but I think its 10U 25V
Comment

Previous template Next

MSI Ventus RTX 4080 16G Broadview schematic needed

by Thetechdude

Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

Thanks.
- Channel: Schematics and Boardviews
07-15-2025, 11:15 AM
MSI PX60 2QD schematic needed, board MS-16H61 VER:1.0

by CasasElectronics

Schematic needed (and boardview if available).

Thanks.
- Channel: Schematic Requests ONLY!
07-19-2025, 06:06 PM
dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad

by knk2729

dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad
- Channel: Schematics and Boardviews
06-23-2025, 07:09 PM
Dynabook Satellite Pro L40-G-102 Schematic Needed

by Ven

Dynabook Satellite Pro L40-G-102 Schematic Needed.
- Channel: Schematic Requests ONLY!
02-24-2025, 06:21 AM
MSI GF63 12UDX-234XPT - MS-16R81 VER:2.0 - Schematic needed

by camisao

Hello,
I need your help finding the MSI GF63 12UDX (Board MS-16R81 VER_2.0) schematic.
I accidently inserted MSI USB a programmer that was connected to a board that has Neutral tied to GND, instead of connecting it to the USB-ISO that was on another port (Friday afternoon mistakes....).
Now it doesn't start. 😏
I've looked for burned parts but found none.
The 20V from the adapter are ok and the battery has 12V if I disconnect the battery plug.
I need the schematic to try to understand where there the problem may be or if it is repairable.
Thanks!...
- Channel: Schematic Requests ONLY!
12-02-2024, 05:30 AM
Loading...
No more items.

HP 17-ca1035ca Schematic needed

HP 17-ca1035ca Schematic needed

Comment

Related Topics